PYQ Vault

NEET Physics · Current Electricity

Current, Drift and Resistivity

Current as a slow drift of free electrons, the link I = neAv between current and drift speed, resistivity and conductivity, and how resistance changes with temperature.

Why this matters

Seven NEET questions from 2021 to 2026. Two test the drift formulas (a match of four relations in 2021, a thinner wire carrying more current in Re-NEET 2024), two use resistivity (current density from a field in 2022, a colour code in 2023) and three use temperature: metals against semiconductors, a coefficient from two readings, and two resistors whose changes cancel.

Concept 1 of 3: Current, drift velocity and current density

Free electrons in a metal rush about at high speed in random directions, so on their own they carry no net charge anywhere. A field E gives each one a small push opposite to E between collisions. The result is a slow average drift, the drift velocity, laid on top of the random motion. The current through a wire is just how much charge this drift carries across a section each second.

Definition

  • Current: I=ΔQΔtI = \dfrac{\Delta Q}{\Delta t}. Current density: J=IAJ = \dfrac{I}{A}, a vector along E.
  • Drift velocity: vd=eEτmv_d = \dfrac{eE\tau}{m}, where τ\tau is the relaxation time, the average time between collisions.
  • Current and drift: I=neAvdI = neAv_d, so J=nevdJ = nev_d. Here n is the number of free electrons per unit volume.
  • Mobility is drift speed per unit field: μ=vdE=eτm\mu = \dfrac{v_d}{E} = \dfrac{e\tau}{m}.
  • For one material n is fixed, so I∝AvdI \propto Av_d, and for a round wire A∝d2A \propto d^{2}.

Current and drift

I=neAvd,vd=eEτm,J=nevd=σEI = neAv_d, \qquad v_d = \frac{eE\tau}{m}, \qquad J = nev_d = \sigma E
  • nnfree electrons per unit volume
  • τ\taurelaxation time
  • vdv_ddrift velocity

Worked example

A wire carries a current I with drift velocity v. A second wire of the same material has twice the radius and carries 2I. What is its drift velocity?
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · Re-NEET (UG) 2024 — 23 Jun 2024 · Q12Moderate

Example 1 · Current Electricity · Current, Drift and Resistivity

A uniform wire of diameter dd carries a current of 100 mA when the mean drift velocity of electrons in the wire is vv. For a wire of diameter d2\dfrac{d}{2} of the same material to carry a current of 200 mA, the mean drift velocity of electrons in the wire is

Area goes as the diameter squared

Halving a wire's diameter cuts its area to a quarter, so for the same current the drift velocity becomes four times, not two times.

Drift is slow, the signal is not

Drift velocity is only about a millimetre per second. A bulb lights at once because the field sets up along the whole wire almost instantly, not because electrons race from the switch.

Concept 2 of 3: Resistance, resistivity and conductivity

Resistance depends on the shape of a wire: longer means more resistance, thicker means less. Resistivity is the part that belongs to the material alone. A metal has a low resistivity because it has many free electrons and they travel a fair time between collisions. Conductivity is just the reverse of resistivity.

Definition

  • R=ρLAR = \dfrac{\rho L}{A}. Resistivity ρ\rho depends on the material and the temperature, not the size.
  • From the drift picture: ρ=mne2τ\rho = \dfrac{m}{ne^{2}\tau}. Conductivity σ=1ρ\sigma = \dfrac{1}{\rho}.
  • Ohm's law in point form: J=σEJ = \sigma E, so ρ=EJ\rho = \dfrac{E}{J}.
  • A wire stretched to n times its length keeps its volume, so its area falls to 1n\dfrac{1}{n} and R′=n2RR' = n^{2}R.
  • Carbon resistor colour code: the first two bands are digits, the third is the power of ten, the fourth the tolerance (gold 5%, silver 10%). Digits: black 0, brown 1, red 2, orange 3, yellow 4, green 5, blue 6, violet 7, grey 8, white 9.

Resistance

R=ρLA,ρ=mne2τ=EJ,Rstretched=n2RR = \frac{\rho L}{A}, \qquad \rho = \frac{m}{ne^{2}\tau} = \frac{E}{J}, \qquad R_{\text{stretched}} = n^{2}R
length LareaAshort + thick → LOW Rlength 2L (thinner area A/2)long + thin → HIGH R

R = ρL/A — resistance grows with length and falls with cross-sectional area. Stretching keeps volume fixed: longer ⟹ thinner ⟹ R ∝ L².

Worked example

A wire of length 2 m and cross-section 10−6 m210^{-6}\ \text{m}^{2} has resistance 4 Ω. What is the current density in it when the field inside is 2 V/m?
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2022 · NEET (UG) 2022 — 17 Jul 2022 · Q32Moderate

Example 2 · Current Electricity · Current, Drift and Resistivity

A copper wire of length 10 m and radius (10−2π)\left(\dfrac{10^{-2}}{\sqrt{\pi}}\right) m has electrical resistance of 10 Ω\Omega. The current density in the wire for an electric field strength of 10 (V/m) is

Resistivity belongs to the material

Cutting, stretching or bending a wire changes its resistance, never its resistivity. Only a change of material or temperature changes ρ.

Stretching scales by n squared

Stretching to n times the length also shrinks the area by n, because the volume stays the same. The resistance becomes n2Rn^{2}R, not nRnR.

The third band is a multiplier

In the colour code the third band is the number of zeros, not a third digit. 22000 Ω is red, red, orange.

Concept 3 of 3: Temperature dependence of resistance

Heat a metal and its ions vibrate more, so electrons collide more often. The relaxation time falls and the resistance rises. A semiconductor behaves the other way: heat frees many more charge carriers, and that gain beats the extra collisions, so its resistance falls.

Definition

  • Metals: RT=R0[1+α(T−T0)]R_T = R_0\left[1 + \alpha(T - T_0)\right], with α\alpha positive. Then α=RT−R0R0(T−T0)\alpha = \dfrac{R_T - R_0}{R_0(T - T_0)}.
  • Semiconductors and insulators: resistance falls as temperature rises (negative coefficient).
  • Alloys such as nichrome and manganin: a very small α\alpha, so their resistance hardly changes. They are used in standard resistors.
  • Two resistors with equal and opposite small changes: in series the total stays the same to first order, in parallel the product R02(1−α2ΔT2)R_0^{2}(1 - \alpha^{2}\Delta T^{2}) shrinks.

Temperature coefficient

RT=R0[1+α(T−T0)],α=RT−R0R0(T−T0)R_T = R_0\left[1 + \alpha (T - T_0)\right], \qquad \alpha = \frac{R_T - R_0}{R_0 (T - T_0)}

Worked example

A copper coil has resistance 10 Ω at 0 °C and 12 Ω at 50 °C. Find its temperature coefficient of resistance.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2023 · NEET (UG) 2023 — 07 May 2023 · Q49Easy

Example 3 · Current Electricity · Current, Drift and Resistivity

The resistance of platinum wire at 0∘C0^\circ\text{C} is 2 Ω2\ \Omega and 6.8 Ω6.8\ \Omega at 80∘C80^\circ\text{C}. The temperature coefficient of resistance of the wire is

Divide by R at the reference temperature

In α=RT−R0R0 ΔT\alpha = \dfrac{R_T - R_0}{R_0\,\Delta T} the denominator uses the resistance at the reference temperature, not the final one.

Semiconductors go the other way

Resistance rises with temperature for metals but falls for semiconductors. A statement that it rises or falls for both is false.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (3)

  • Current, drift velocity and current density

    Current and drift

    I=neAvd,vd=eEτm,J=nevd=σEI = neAv_d, \qquad v_d = \frac{eE\tau}{m}, \qquad J = nev_d = \sigma E
  • Resistance, resistivity and conductivity

    Resistance

    R=ρLA,ρ=mne2τ=EJ,Rstretched=n2RR = \frac{\rho L}{A}, \qquad \rho = \frac{m}{ne^{2}\tau} = \frac{E}{J}, \qquad R_{\text{stretched}} = n^{2}R
  • Temperature dependence of resistance

    Temperature coefficient

    RT=R0[1+α(T−T0)],α=RT−R0R0(T−T0)R_T = R_0\left[1 + \alpha (T - T_0)\right], \qquad \alpha = \frac{R_T - R_0}{R_0 (T - T_0)}

Watch out for (7)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper