NEET Physics · Free notes
Mechanical Properties of Solids: NEET Physics
Mechanical Properties of Solids has 5 past-year questions in NEET Physics, from 2022 to 2026: 1 EASY and 4 MODERATE. NEET 2022, 2023 and 2026 asked it once each and NEET 2024 twice; NEET 2021, 2025, Re-NEET 2024 and Re-NEET 2026 did not ask it. Every question rests on one idea: a modulus is a stress divided by the strain it causes. Three need a line of arithmetic (a stress, a stretch up to the elastic limit, the force in a heated bar that cannot expand) and two test the definitions themselves. Marks are lost on small slips: an extension scaled by the diameter instead of its square, compressibility mixed up with the bulk modulus, or the area left out when a stress is turned into a force.
The handout has every subtopic, worked example, formula and trap with answers shown. The formula sheet is the chapter’s formulas and traps alone, on one page.
Subtopic notes
Stress, Strain and Young's Modulus
3 PYQsStress as restoring force per unit area and strain as a fractional change, Hooke's law and Young's modulus (ΔL = FL/AY), the elastic limit, and the stress in a rod that is heated but not allowed to expand.
Elastic Moduli and Materials
2 PYQsThe shear and bulk moduli, compressibility and Poisson's ratio beside Young's modulus, then the stress-strain curve and how steel, copper and rubber behave under load.
Formula & revision sheet
4 formulas · 1 reference tables · 14 gotchas across all subtopics — the exam-eve cheat-sheet
Formula & revision sheet
4 formulas · 1 reference tables · 14 gotchas across all subtopics — the exam-eve cheat-sheet
Formulas (3)
Watch out for (9)
- Stress uses the area of cross-section→ Stress, strain and Hooke's law
- Strain has no unit→ Stress, strain and Hooke's law
- A light wire holding a load has the same stress all along it→ Stress, strain and Hooke's law
- Y belongs to the material, not the wire→ Young's modulus and the elastic limit
- Extension goes as one over the diameter squared→ Young's modulus and the elastic limit
- The stored energy has a half in it→ Young's modulus and the elastic limit
- Length cancels in thermal stress→ Thermal stress
- Force needs the area→ Thermal stress
- Heating squeezes, cooling pulls→ Thermal stress
Reference tables (1)
The stress-strain curve and how materials behave7 rows
| Term | What it means | Example |
|---|---|---|
| Proportional limit | Up to this point stress is proportional to strain and the graph is a straight line | Hooke's law holds for a steel wire under a small load |
| Yield point (elastic limit) | The largest stress after which the body still returns to its original size | A spring loaded beyond it stays a little longer |
| Plastic region | Beyond the yield point the strain stays when the load is removed: a permanent set | A copper wire bent out of shape stays bent |
| Ultimate tensile strength | The greatest stress the material can bear | A crane's steel rope is chosen so its load stays far below this |
| Fracture point | The stress at which the material breaks | A wire snaps |
| Ductile and brittle | A ductile material breaks far beyond its ultimate strength; a brittle one breaks soon after it | Copper is ductile; glass is brittle |
| Spring stretching | A coil spring changes shape, not length of wire or volume, as it stretches | Its stretch is set by the shear modulusQ NEET 2022: the assertion that a spring's stretching is set by the shear modulus is true; the reason, that a copper spring has more tensile strength than a steel one, is false. |
Watch out for (5)
- Compressibility is the reciprocal of the bulk modulus→ Shear modulus, bulk modulus and Poisson's ratio
- A volume changes by three times the side's fraction→ Shear modulus, bulk modulus and Poisson's ratio
- Poisson's ratio puts the sideways strain on top→ Shear modulus, bulk modulus and Poisson's ratio
- More elastic does not mean stretchier→ The stress-strain curve and how materials behave
- The elastic limit is not the breaking point→ The stress-strain curve and how materials behave
PYQ weightage by concept
5 concepts · 5 PYQs — where the marks actually sit, so you know what to drill first
PYQ weightage by concept
5 concepts · 5 PYQs — where the marks actually sit, so you know what to drill first
| Concept | PYQs | Share |
|---|---|---|
| Stress, strain and Hooke's law | 1 | 20% |
| Young's modulus and the elastic limit | 1 | 20% |
| Thermal stress | 1 | 20% |
| Concept | PYQs | Share |
|---|---|---|
| Shear modulus, bulk modulus and Poisson's ratio | 1 | 20% |
| The stress-strain curve and how materials behave | 1 | 20% |
Test yourself on a real paper
Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.