PYQ Vault

NEET Physics · Mechanical Properties of Solids

Elastic Moduli and Materials

The shear and bulk moduli, compressibility and Poisson's ratio beside Young's modulus, then the stress-strain curve and how steel, copper and rubber behave under load.

Why this matters

Two NEET questions. NEET 2026 asks to match Young's modulus, compressibility, bulk modulus and Poisson's ratio with their formulas. NEET 2022 gives an assertion that a spring's stretching is set by the shear modulus, with a reason comparing the tensile strength of copper and steel.

Concept 1 of 2: Shear modulus, bulk modulus and Poisson's ratio

Each kind of stress has its own modulus, always stress divided by the strain it causes. Young's modulus is for stretching, the shear modulus for twisting a shape sideways, and the bulk modulus for squeezing from all sides. Solids resist all three; a liquid or a gas has no fixed shape, so only the bulk modulus applies to it. A stretched wire also gets thinner, and Poisson's ratio compares that sideways strain with the stretch.

Definition

  • Shear modulus (modulus of rigidity): G=F/AθG = \dfrac{F/A}{\theta}, with θ\theta the shearing strain. For most materials G≈Y3G \approx \dfrac{Y}{3}.
  • Bulk modulus: B=−pΔV/VB = -\dfrac{p}{\Delta V/V}. The minus sign makes B positive, because a rise in pressure makes the volume smaller.
  • Compressibility k=1Bk = \dfrac{1}{B}. Gases are the most compressible, solids the least.
  • Poisson's ratio =lateral strainlongitudinal strain=Δd/dΔL/L= \dfrac{\text{lateral strain}}{\text{longitudinal strain}} = \dfrac{\Delta d/d}{\Delta L/L}. It has no unit.
  • Y and G apply only to solids; B applies to solids, liquids and gases.
  • A small change in each side of a cube by a fraction x changes its volume by about 3x.

Elastic moduli

G=F/Aθ,B=−pΔV/V,k=1B,σ=Δd/dΔL/LG = \frac{F/A}{\theta}, \qquad B = -\frac{p}{\Delta V/V}, \qquad k = \frac{1}{B}, \qquad \sigma = \frac{\Delta d/d}{\Delta L/L}
  • GGshear modulus
  • BBbulk modulus
  • kkcompressibility
  • σ\sigmaPoisson's ratio

Worked example

The bulk modulus of water is 2.2×109 N m−22.2 \times 10^{9}\ \text{N m}^{-2}. What pressure reduces the volume of some water by 0.5%?
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · NEET (UG) 2026 — 03 May 2026 · Q2Moderate

Example 1 · Mechanical Properties of Solids · Elastic Moduli and Materials

Match List I with List II:
List IList II
A. Young's ModulusI. ΔdΔL(Ld)\dfrac{\Delta d}{\Delta L}\left(\dfrac{L}{d}\right)
B. CompressibilityII. FLA(ΔL)\dfrac{FL}{A(\Delta L)}
C. Bulk ModulusIII. −1ΔP(ΔVV)-\dfrac{1}{\Delta P}\left(\dfrac{\Delta V}{V}\right)
D. Poisson's RatioIV. −P(VΔV)-P\left(\dfrac{V}{\Delta V}\right)
Choose the correct answer from the options given below:

Compressibility is the reciprocal of the bulk modulus

A large bulk modulus means a material is hard to squeeze, so its compressibility 1B\dfrac{1}{B} is small. They are not the same quantity.

A volume changes by three times the side's fraction

When each side of a cube shrinks by 1%, the volume shrinks by about 3%. Using the 1% as the volume strain gives an answer three times too small.

Poisson's ratio puts the sideways strain on top

Poisson's ratio is the lateral strain divided by the longitudinal strain, Δd/dΔL/L\dfrac{\Delta d/d}{\Delta L/L}. Turning it upside down gives a number larger than 1.

Concept 2 of 2: The stress-strain curve and how materials behave

Pull a metal wire harder and harder and plot stress against strain. At first the graph is a straight line and the wire springs back. Past a point it stops springing back fully, then it flows, and at last it breaks. Different materials go through these stages differently, which is why steel is used for springs and girders and rubber for bands.

Definition

  • The slope of the straight part of a stress-strain graph is Young's modulus: the steeper line belongs to the stiffer material.
  • More elastic means harder to deform for a given stress: steel is more elastic than rubber.
  • When a coil spring is stretched, its wire is twisted rather than lengthened, so the spring's stretch is set by the shear modulus of its material.
  • Materials like rubber and the tissue of the aorta stretch to large strains and still return: they are elastomers.

Diagram · reading Young's modulus off a graph

stress (10⁷ N/m²)strain (10⁻⁴)02448(4, 8)steelcopperslope = Ysteepest = largest Ystrain (10⁻⁴)stress (10⁷ N/m²)0510510coppersteelslope = 1/Ysteepest = smallest Y

Steel, Y = 2 × 10¹¹ N/m²; copper, Y = 1 × 10¹¹ N/m². Within the elastic limit each line is straight. Stress against strain: the slope is Y, so steel is steeper (its marked point, strain 4 × 10⁻⁴ at stress 8 × 10⁷ N/m², gives 8 × 10⁷ ÷ 4 × 10⁻⁴ = 2 × 10¹¹ N/m²). Swap the axes and the slope is 1/Y: copper is now the steeper line. Y belongs to the material, so a longer or thicker wire of steel gives the same line.

TermWhat it meansExample
Proportional limitUp to this point stress is proportional to strain and the graph is a straight lineHooke's law holds for a steel wire under a small load
Yield point (elastic limit)The largest stress after which the body still returns to its original sizeA spring loaded beyond it stays a little longer
Plastic regionBeyond the yield point the strain stays when the load is removed: a permanent setA copper wire bent out of shape stays bent
Ultimate tensile strengthThe greatest stress the material can bearA crane's steel rope is chosen so its load stays far below this
Fracture pointThe stress at which the material breaksA wire snaps
Ductile and brittleA ductile material breaks far beyond its ultimate strength; a brittle one breaks soon after itCopper is ductile; glass is brittle
Spring stretchingA coil spring changes shape, not length of wire or volume, as it stretchesIts stretch is set by the shear modulusQ
NEET 2022: the assertion that a spring's stretching is set by the shear modulus is true; the reason, that a copper spring has more tensile strength than a steel one, is false.
Steel has a large Young's modulus and a high tensile strength; rubber stretches far but has a small Young's modulus.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2022 · NEET (UG) 2022 — 17 Jul 2022 · Q44Moderate

Example 2 · Mechanical Properties of Solids · Elastic Moduli and Materials

Given below are two statements : One is labelled as Assertion (A) and the other is labelled as Reason (R). Assertion (A): The stretching of a spring is determined by the shear modulus of the material of the spring. Reason (R): A coil spring of copper has more tensile strength than a steel spring of same dimensions. In the light of the above statements, choose the most appropriate answer from the options given below

More elastic does not mean stretchier

In physics a more elastic material is one that is harder to deform, with a larger Young's modulus. Steel is more elastic than rubber.

The elastic limit is not the breaking point

Past the elastic limit a wire stops returning to its length, but it has not broken. It still carries more load until its fracture point.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (1)

  • Shear modulus, bulk modulus and Poisson's ratio

    Elastic moduli

    G=F/Aθ,B=−pΔV/V,k=1B,σ=Δd/dΔL/LG = \frac{F/A}{\theta}, \qquad B = -\frac{p}{\Delta V/V}, \qquad k = \frac{1}{B}, \qquad \sigma = \frac{\Delta d/d}{\Delta L/L}

Reference tables (1)

The stress-strain curve and how materials behave7 rows
TermWhat it meansExample
Proportional limitUp to this point stress is proportional to strain and the graph is a straight lineHooke's law holds for a steel wire under a small load
Yield point (elastic limit)The largest stress after which the body still returns to its original sizeA spring loaded beyond it stays a little longer
Plastic regionBeyond the yield point the strain stays when the load is removed: a permanent setA copper wire bent out of shape stays bent
Ultimate tensile strengthThe greatest stress the material can bearA crane's steel rope is chosen so its load stays far below this
Fracture pointThe stress at which the material breaksA wire snaps
Ductile and brittleA ductile material breaks far beyond its ultimate strength; a brittle one breaks soon after itCopper is ductile; glass is brittle
Spring stretchingA coil spring changes shape, not length of wire or volume, as it stretchesIts stretch is set by the shear modulusQ
NEET 2022: the assertion that a spring's stretching is set by the shear modulus is true; the reason, that a copper spring has more tensile strength than a steel one, is false.
Steel has a large Young's modulus and a high tensile strength; rubber stretches far but has a small Young's modulus.

Watch out for (5)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper