PYQ Vault

NEET Physics · System of Particles and Rotational Motion

Rotation and Rolling

Rotation about a fixed axis with constant angular acceleration, torque and angular momentum, the conservation of angular momentum, and a wheel that rolls without slipping.

Why this matters

Six NEET questions from 2022 to 2026. Three are rotational kinematics: a flywheel's angular acceleration (2022), the direction of angular acceleration (2023) and the turns made while speeding up (2026). Two are angular momentum: the Sun's period if it swelled (2025) and a spinning disc's angular momentum about two points (Re-NEET 2026). One is rolling: which point of a rolling wheel moves faster (2024).

Concept 1 of 3: Rotational kinematics

When a rigid body turns about a fixed axis, every particle sweeps the same angle in the same time. So one angular velocity and one angular acceleration describe the whole body. With constant angular acceleration the equations are the same as for straight-line motion, with θ, ω and α in place of x, v and a.

Definition

  • ω=dθdt\omega = \dfrac{d\theta}{dt}, α=dωdt\alpha = \dfrac{d\omega}{dt}. For a fixed axis both point along the axis, by the right-hand rule.
  • A particle at distance r from the axis: speed v=ωrv = \omega r, tangential acceleration at=αra_t = \alpha r, centripetal acceleration ω2r\omega^{2}r.
  • Constant α\alpha: ω=ω0+αt\omega = \omega_0 + \alpha t, θ=ω0t+12αt2\theta = \omega_0t + \tfrac{1}{2}\alpha t^{2}, ω2=ω02+2αθ\omega^{2} = \omega_0^{2} + 2\alpha\theta.
  • Convert first: nn rpm =n×2π60= n \times \dfrac{2\pi}{60} rad/s. Number of turns =θ2π= \dfrac{\theta}{2\pi}.

Constant angular acceleration

ω=ω0+αt,θ=ω0t+12αt2,ω2=ω02+2αθ\omega = \omega_0 + \alpha t, \qquad \theta = \omega_0 t + \tfrac{1}{2}\alpha t^{2}, \qquad \omega^{2} = \omega_0^{2} + 2\alpha\theta
  • ω0\omega_0initial angular velocity
  • α\alphaangular acceleration
  • θ\thetaangle turned, in radians

Worked example

A wheel starts from rest and reaches 20 rad/s in 4 s with uniform angular acceleration. Find the angular acceleration and the angle it turns through.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2026 · NEET (UG) 2026 — 03 May 2026 · Q4Moderate

Example 1 · System of Particles and Rotational Motion · Rotation and Rolling

The angular speed of a flywheel is increased from 600 rpm to 1200 rpm in 10 s. The number of revolutions completed by the flywheel during this time is:

Convert rpm before you start

The equations need radians and seconds. 900 rpm is 900×2π60=30π900 \times \dfrac{2\pi}{60} = 30\pi rad/s; putting 900 straight in gives an answer wrong by a factor of about 10.

Turns are not radians

The equations give θ in radians. Divide by 2π2\pi to get the number of revolutions.

Angular acceleration lies along the axis

For rotation about a fixed axis, ω⃗\vec{\omega} and α⃗\vec{\alpha} both point along the axis, not along the tangent or the radius of the circle a particle moves on.

Concept 2 of 3: Torque, angular momentum and its conservation

Torque does for turning what force does for straight-line motion: it changes the angular momentum. With no outside torque, the angular momentum Iω cannot change. So when a spinning body pulls its mass in towards the axis, I falls and ω must rise, which is how a skater spins faster with her arms folded.

Definition

  • Angular momentum of a particle: L⃗=r⃗×p⃗\vec{L} = \vec{r} \times \vec{p}. For a particle moving in a straight line, L=mv d⊥L = mv\,d_{\perp}, with d⊥d_{\perp} the perpendicular distance from the point to the line.
  • A rigid body about a fixed axis: L=IωL = I\omega.
  • τ⃗=dL⃗dt\vec{\tau} = \dfrac{d\vec{L}}{dt}. About a fixed axis, τ=Iα\tau = I\alpha.
  • Rotational kinetic energy: K=12Iω2=L22IK = \tfrac{1}{2}I\omega^{2} = \dfrac{L^{2}}{2I}. Work done by a torque τθ\tau\theta; power τω\tau\omega.
  • Conservation: if the external torque is zero, I1ω1=I2ω2I_1\omega_1 = I_2\omega_2. Since ω=2πT\omega = \dfrac{2\pi}{T}, the period T goes up in proportion to I.
  • When I changes this way, L stays fixed but the kinetic energy does not.

Rotational dynamics

L=Iω,τ=Iα=dLdt,I1ω1=I2ω2,K=12Iω2=L22IL = I\omega, \qquad \tau = I\alpha = \frac{dL}{dt}, \qquad I_1\omega_1 = I_2\omega_2, \qquad K = \tfrac{1}{2}I\omega^{2} = \frac{L^{2}}{2I}
  • LLangular momentum
  • τ\tautorque about the axis
  • IImoment of inertia about the axis

Worked example

A turntable of moment of inertia 0.4 kg m² spins freely at 10 rad/s. A lump of clay dropped onto it raises its moment of inertia to 0.5 kg m². Find the new angular speed and the change in kinetic energy.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2025 · NEET (UG) 2025 — 04 May 2025 · Q17Moderate

Example 2 · System of Particles and Rotational Motion · Rotation and Rolling

The Sun rotates around its centre once in 27 days. What will be the period of revolution if the Sun were to expand to twice its present radius without any external influence? Assume the Sun to be a sphere of uniform density.

Angular momentum is kept, kinetic energy is not

With no outside torque, IωI\omega stays fixed while I changes. The kinetic energy L22I\dfrac{L^{2}}{2I} then changes, so do not use energy conservation in its place.

Period goes with I, speed goes against it

From Iω=I\omega = constant, ω falls when I rises, so the period T=2πωT = \dfrac{2\pi}{\omega} rises in the same ratio as I.

A straight-line motion can have angular momentum

A particle moving in a straight line has angular momentum mvd⊥mvd_{\perp} about any point off its line. It is zero only about points on the line itself.

Concept 3 of 3: Rolling without slipping

A rolling wheel moves forward and spins at the same time. Without slipping, these two motions cancel exactly where the wheel touches the ground, so that point is at rest for an instant, and they add at the top. Its kinetic energy has two parts too: the motion of the centre and the spin about it.

Definition

  • Rolling without slipping: vcm=ωRv_{cm} = \omega R.
  • Speeds of points on the rim: the contact point 0, the centre vcmv_{cm}, the top 2vcm2v_{cm}, a rim point level with the centre 2 vcm\sqrt{2}\,v_{cm}.
  • Kinetic energy: K=12mv2+12Iω2=12mv2(1+k2R2)K = \tfrac{1}{2}mv^{2} + \tfrac{1}{2}I\omega^{2} = \tfrac{1}{2}mv^{2}\left(1 + \dfrac{k^{2}}{R^{2}}\right). Ring: mv2mv^{2}. Disc: 34mv2\tfrac{3}{4}mv^{2}. Solid sphere: 710mv2\tfrac{7}{10}mv^{2}.
  • Rolling down a slope from rest through a height h: v=2gh1+k2/R2v = \sqrt{\dfrac{2gh}{1 + k^{2}/R^{2}}}, and the acceleration is gsin⁡θ1+k2/R2\dfrac{g\sin\theta}{1 + k^{2}/R^{2}}.
  • The smaller k2/R2k^{2}/R^{2}, the faster it rolls: a solid sphere beats a disc, which beats a ring. Mass and radius do not matter.

Rolling

vcm=ωR,K=12mv2(1+k2R2),v=2gh1+k2/R2v_{cm} = \omega R, \qquad K = \tfrac{1}{2}mv^{2}\left(1 + \frac{k^{2}}{R^{2}}\right), \qquad v = \sqrt{\frac{2gh}{1 + k^{2}/R^{2}}}
  • vcmv_{cm}speed of the centre
  • kkradius of gyration about the centre
  • RRradius of the rolling body

Diagram · how a rolling body's kinetic energy splits

Same mass, same speed v = RωRing k²/R² = 1, K = 2 × ½mv²½ moving½ spinDisc k²/R² = 1/2, K = 1.5 × ½mv²⅔ moving⅓ spinSolid sphere k²/R² = 2/5, K = 1.4 × ½mv²5/7 moving2/7 spin½mv² (sliding, no spin)moving: ½mv²spinning: ½Iω² = ½mv² × k²/R²

Fractions are of each body's own total. A 3 kg disc at 2 m/s: ½mv² = 6 J moving plus 3 J spinning, 9 J in all, so a third is rotational. Every rolling body has more than ½mv²: setting mgh = ½mv² is the sliding answer.

Worked example

A solid sphere rolls without slipping down a slope from rest, through a height of 1.4 m. Find its speed at the bottom. Take g = 10 m/s².
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · NEET (UG) 2024 — 05 May 2024 · Q2Easy

Example 3 · System of Particles and Rotational Motion · Rotation and Rolling

A wheel of a bullock cart is rolling on a level road as shown in the figure below. If its linear speed is vv in the direction shown, which one of the following options is correct (PP and QQ are any highest and lowest points on the wheel, respectively)?

Rolling energy includes the spin

A rolling body's kinetic energy is 12mv2(1+k2/R2)\tfrac{1}{2}mv^{2}\left(1 + k^{2}/R^{2}\right), not 12mv2\tfrac{1}{2}mv^{2}. That is why a rolling body reaches the bottom of a slope slower than one sliding without friction.

Shape decides the race, not mass

Rolling speed and acceleration depend only on k2/R2k^{2}/R^{2}. A heavy disc and a light disc of any size reach the bottom together.

Rolling needs friction

On a perfectly smooth slope nothing makes the body spin, so it slides with acceleration gsin⁡θg\sin\theta. Rolling without slipping down a slope needs a rough surface.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (3)

  • Rotational kinematics

    Constant angular acceleration

    ω=ω0+αt,θ=ω0t+12αt2,ω2=ω02+2αθ\omega = \omega_0 + \alpha t, \qquad \theta = \omega_0 t + \tfrac{1}{2}\alpha t^{2}, \qquad \omega^{2} = \omega_0^{2} + 2\alpha\theta
  • Torque, angular momentum and its conservation

    Rotational dynamics

    L=Iω,τ=Iα=dLdt,I1ω1=I2ω2,K=12Iω2=L22IL = I\omega, \qquad \tau = I\alpha = \frac{dL}{dt}, \qquad I_1\omega_1 = I_2\omega_2, \qquad K = \tfrac{1}{2}I\omega^{2} = \frac{L^{2}}{2I}
  • Rolling without slipping

    Rolling

    vcm=ωR,K=12mv2(1+k2R2),v=2gh1+k2/R2v_{cm} = \omega R, \qquad K = \tfrac{1}{2}mv^{2}\left(1 + \frac{k^{2}}{R^{2}}\right), \qquad v = \sqrt{\frac{2gh}{1 + k^{2}/R^{2}}}

Watch out for (9)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper