PYQ Vault

NEET Physics · System of Particles and Rotational Motion

Torque and Equilibrium

Torque as the turning effect of a force, found with the vector product, and the two conditions a rigid body must meet to stay at rest.

Why this matters

Two NEET questions, both HARD: a rod balanced on a wedge with two masses hung from it (2021), and the friction on a rod leaning against a smooth wall (2025). Both come down to one move: take moments about a well-chosen point.

Concept 1 of 2: Torque and the moment of a force

A door opens easily when you push far from the hinges and at right angles to the door. Push near the hinges, or along the door towards them, and nothing turns. Torque measures this turning effect: the force times how far its line of action passes from the turning point.

Definition

  • Torque about a point: τ⃗=r⃗×F⃗\vec{\tau} = \vec{r} \times \vec{F}, with r⃗\vec{r} drawn from that point to where the force acts. Unit N m.
  • Size: τ=rFsin⁡θ=F×d⊥\tau = rF\sin\theta = F \times d_{\perp}, where d⊥d_{\perp} is the perpendicular distance from the point to the line of the force (the lever arm).
  • Direction: perpendicular to both r⃗\vec{r} and F⃗\vec{F}, by the right-hand rule. So r⃗⋅τ⃗=0\vec{r} \cdot \vec{\tau} = 0 and F⃗⋅τ⃗=0\vec{F} \cdot \vec{\tau} = 0.
  • Vector product: A⃗×B⃗=−B⃗×A⃗\vec{A} \times \vec{B} = -\vec{B} \times \vec{A}. i^×j^=k^\hat{i} \times \hat{j} = \hat{k}, j^×k^=i^\hat{j} \times \hat{k} = \hat{i}, k^×i^=j^\hat{k} \times \hat{i} = \hat{j}, and i^×i^=0\hat{i} \times \hat{i} = 0.
  • In the xy plane: τz=xFy−yFx\tau_z = xF_y - yF_x.
  • Couple: two equal and opposite forces whose lines are a distance d apart. Net force zero, torque FdFd about any point.
  • Principle of moments: a lever at rest has anticlockwise moments equal to clockwise moments about its pivot.

Torque

τ⃗=r⃗×F⃗,τ=rFsin⁡θ=F d⊥\vec{\tau} = \vec{r} \times \vec{F}, \qquad \tau = rF\sin\theta = F\,d_{\perp}
  • r⃗\vec{r}position of the point where the force acts, from the chosen point
  • θ\thetaangle between r and F
  • d⊥d_{\perp}lever arm: perpendicular distance to the line of the force

Diagram · torque τ = r × F (drag to rotate)

rFτ = r × F

Torque about the pivot is τ = r × F, where r reaches the point where the force F acts. It points perpendicular to the plane of r and F (right-hand rule, here out of that plane), with magnitude |τ| = r·F·sinθ — largest when the force is perpendicular to the arm, zero when it's along it.

Worked example

A force F⃗=(i^+3j^)\vec{F} = (\hat{i} + 3\hat{j}) N acts at the point r⃗=(2i^+j^)\vec{r} = (2\hat{i} + \hat{j}) m. Find its torque about the origin.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2021 · NEET (UG) 2021 — 12 Sep 2021 · Q48Hard

Example 1 · System of Particles and Rotational Motion · Torque and Equilibrium

A uniform rod of length 200 cm and mass 500 g is balanced on a wedge placed at 40 cm mark. A mass of 2 kg is suspended from the rod at 20 cm and another unknown mass mm is suspended from the rod at 160 cm mark as shown in the figure. Find the value of mm such that the rod is in equilibrium. (g=10(g = 10 m/s2)^2)

The lever arm is a perpendicular distance

Use the perpendicular distance from the pivot to the line of the force, not the distance to the point where it acts. A force along the line through the pivot gives no torque at all.

Order matters in the cross product

Torque is r⃗×F⃗\vec{r} \times \vec{F}. Working out F⃗×r⃗\vec{F} \times \vec{r} gives the same size but every component with the wrong sign.

A couple turns but does not push

Two equal and opposite forces on different lines give zero net force yet a torque Fd, so a body can spin up with its centre of mass at rest.

Concept 2 of 2: Equilibrium of a rigid body

A body stays at rest only if nothing pushes it along and nothing turns it. So the forces must add to zero and the torques must add to zero. Since the torques add to zero about every point, you are free to take moments about the point where an unknown force acts, and that force drops out.

Definition

  • Translational equilibrium: ∑F⃗=0\sum \vec{F} = 0 (both components).
  • Rotational equilibrium: ∑τ⃗=0\sum \vec{\tau} = 0 about any point.
  • The weight of a body acts at its centre of gravity. In a uniform field this is the centre of mass: the midpoint of a uniform rod.
  • A smooth surface pushes only at right angles to itself (no friction). A rough floor gives a normal force and a friction force along it.
  • Choose the turning point at the place with the most unknown forces; their torques are then zero.

Conditions for equilibrium

∑F⃗=0,∑τ⃗=0\sum \vec{F} = 0, \qquad \sum \vec{\tau} = 0

Visualization · principle of moments on a see-saw

Balancedpivot300 N400 N2.0 m1.5 manticlockwise: 300 × 2.0 = 600 N mclockwise: 400 × 1.5 = 600 N m

Balanced: clockwise moment = anticlockwise moment

A moment is force × distance from the pivot. The 300 N child 2.0 m out turns the see-saw anticlockwise with 600 N m, so a 400 N child must sit 1.5 m out on the other side: 400 × 1.5 = 600 N m. The see-saw is light, so its own weight is left out; on a real beam it acts at the middle.

Worked example

A uniform plank 4 m long and of weight 200 N rests on two supports at its ends. A 400 N person stands 1 m from the left end. Find the force from each support.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2025 · NEET (UG) 2025 — 04 May 2025 · Q22Hard

Example 2 · System of Particles and Rotational Motion · Torque and Equilibrium

A uniform rod of mass 20 kg and length 5 m leans against a smooth vertical wall making an angle of 60∘^\circ with it. The other end rests on a rough horizontal floor. The friction force that the floor exerts on the rod is (Take g=10g = 10 m/s2^2)

Pick the point that kills the unknowns

Taking moments about the point where an unknown force acts removes it from the torque equation. Taking them about the middle of the body usually leaves two unknowns.

Smooth means no friction

A smooth wall or peg pushes only at right angles to its surface. Any friction a problem needs must come from the rough surface.

Angle with the wall or with the floor

A rod making 60° with a vertical wall makes 30° with the floor. Read which angle is given before you resolve the forces.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

  • Torque and the moment of a force

    Torque

    τ⃗=r⃗×F⃗,τ=rFsin⁡θ=F d⊥\vec{\tau} = \vec{r} \times \vec{F}, \qquad \tau = rF\sin\theta = F\,d_{\perp}
  • Equilibrium of a rigid body

    Conditions for equilibrium

    ∑F⃗=0,∑τ⃗=0\sum \vec{F} = 0, \qquad \sum \vec{\tau} = 0

Watch out for (6)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper