NEET Physics · Free notes
System of Particles and Rotational Motion: NEET Physics
System of Particles and Rotational Motion has 19 past-year questions in NEET Physics, from 2021 to 2026: 5 EASY, 9 MODERATE and 5 HARD. Every one of the eight papers asked it, one to four times each. Moment of inertia is the heart of the chapter: eight of the 19 questions use it, at least one every year, and four of those need the parallel axis theorem. Eight come with a figure, so read the figure for the axis before you pick a formula. The steps are short, so marks go on small slips: rpm left unconverted, the ratio of moments of inertia given where the ratio of radii of gyration was asked, or the parallel axis theorem used from an axis that does not pass through the centre of mass. Work through the pages in order, from the centre of mass to a wheel rolling down a slope.
The handout has every subtopic, worked example, formula and trap with answers shown. The formula sheet is the chapter’s formulas and traps alone, on one page.
Subtopic notes
Centre of Mass and Momentum
3 PYQsWhere the centre of mass of a few particles or a simple body lies, how it moves, and why the total momentum of a system stays the same when no outside force acts.
Torque and Equilibrium
2 PYQsTorque as the turning effect of a force, found with the vector product, and the two conditions a rigid body must meet to stay at rest.
Moment of Inertia
8 PYQsMoment of inertia as the rotational version of mass, the standard values for rings, discs, rods and spheres, the radius of gyration, and the parallel and perpendicular axis theorems.
Rotation and Rolling
6 PYQsRotation about a fixed axis with constant angular acceleration, torque and angular momentum, the conservation of angular momentum, and a wheel that rolls without slipping.
Formula & revision sheet
10 formulas · 28 gotchas across all subtopics — the exam-eve cheat-sheet
Formula & revision sheet
10 formulas · 28 gotchas across all subtopics — the exam-eve cheat-sheet
Formulas (2)
Watch out for (5)
- The other mass goes on top→ Locating the centre of mass
- A cut-out shifts the centre away from the hole→ Locating the centre of mass
- Momenta add as vectors→ Motion of the centre of mass and conservation of momentum
- Inner forces cannot move the centre of mass→ Motion of the centre of mass and conservation of momentum
- Equal momenta, unequal speeds→ Motion of the centre of mass and conservation of momentum
Formulas (2)
Watch out for (6)
- The lever arm is a perpendicular distance→ Torque and the moment of a force
- Order matters in the cross product→ Torque and the moment of a force
- A couple turns but does not push→ Torque and the moment of a force
- Pick the point that kills the unknowns→ Equilibrium of a rigid body
- Smooth means no friction→ Equilibrium of a rigid body
- Angle with the wall or with the floor→ Equilibrium of a rigid body
Formulas (3)
Watch out for (8)
- Distance from the axis, not from a point→ Moment of inertia of standard bodies
- Name the axis every time→ Moment of inertia of standard bodies
- Cutting a body cuts its mass→ Moment of inertia of standard bodies
- Take the square root→ Radius of gyration
- k is not the radius of the body→ Radius of gyration
- One axis must pass through the centre of mass→ Parallel and perpendicular axis theorems
- Flat bodies only→ Parallel and perpendicular axis theorems
- Subtract about the same axis→ Parallel and perpendicular axis theorems
Formulas (3)
Watch out for (9)
- Convert rpm before you start→ Rotational kinematics
- Turns are not radians→ Rotational kinematics
- Angular acceleration lies along the axis→ Rotational kinematics
- Angular momentum is kept, kinetic energy is not→ Torque, angular momentum and its conservation
- Period goes with I, speed goes against it→ Torque, angular momentum and its conservation
- A straight-line motion can have angular momentum→ Torque, angular momentum and its conservation
- Rolling energy includes the spin→ Rolling without slipping
- Shape decides the race, not mass→ Rolling without slipping
- Rolling needs friction→ Rolling without slipping
PYQ weightage by concept
10 concepts · 19 PYQs — where the marks actually sit, so you know what to drill first
PYQ weightage by concept
10 concepts · 19 PYQs — where the marks actually sit, so you know what to drill first
| Concept | PYQs | Share |
|---|---|---|
| Motion of the centre of mass and conservation of momentum | 2 | 11% |
| Locating the centre of mass | 1 | 5% |
| Concept | PYQs | Share |
|---|---|---|
| Torque and the moment of a force | 1 | 5% |
| Equilibrium of a rigid body | 1 | 5% |
| Concept | PYQs | Share |
|---|---|---|
| Parallel and perpendicular axis theorems | 4 | 21% |
| Moment of inertia of standard bodies | 2 | 11% |
| Radius of gyration | 2 | 11% |
| Concept | PYQs | Share |
|---|---|---|
| Rotational kinematics | 3 | 16% |
| Torque, angular momentum and its conservation | 2 | 11% |
| Rolling without slipping | 1 | 5% |
Test yourself on a real paper
Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.