PYQ Vault

NEET Physics · Units and Measurements

Dimensions and Dimensional Analysis

The dimensions of a quantity are the powers of mass, length, time and the other base quantities in it; they let you check an equation, find unknown constants and build a relation.

Why this matters

Nine NEET questions, the largest share of the chapter, asked in every year from 2021 to 2026 except 2023. Five ask for dimensions: E/G (2021), the quantity with dimensions MLT⁻²A⁻² (2022), Stefan, Boltzmann and Wien constants combined (Re-NEET 2026), and two on angles having units but no dimensions (2022, 2024). Two use homogeneity to find constants inside a formula (2024, Re-NEET 2024), and two build a relation: energy in terms of force, acceleration and time (2021) and a balloon emptying (2025).

Concept 1 of 3: Dimensional formulae of common quantities

Every quantity can be built from a few base quantities. Speed is a length divided by a time, so its dimensions are L¹T⁻¹. Write the defining equation of a quantity, replace each symbol by its dimensions, and the dimensional formula follows. Force, MLT⁻², is the starting point for most mechanical quantities.

Definition

  • The dimensions of a quantity are the powers to which the base quantities are raised to represent it. Mass is [M], length [L], time [T], current [A] and temperature [K].
  • A dimensional formula is written in square brackets: force is [MLT−2][MLT^{-2}].
  • A pure number, a ratio of two like quantities (strain, refractive index) and an angle are dimensionless: [M0L0T0][M^{0}L^{0}T^{0}].
  • Radian and steradian are units, yet plane angle and solid angle have no dimensions, since each is a length over a length or an area over an area.
  • Quantities with the same dimensions can still be different quantities: work and torque are both [ML2T−2][ML^{2}T^{-2}].
QuantityDefining relationDimensions
ForceF=maF = ma[MLT−2][MLT^{-2}]
Work, energy, torqueW=FsW = Fs[ML2T−2][ML^{2}T^{-2}]
PowerP=W/tP = W/t[ML2T−3][ML^{2}T^{-3}]
Momentum, impulsep=mvp = mv[MLT−1][MLT^{-1}]
Angular momentum, Planck's constantL=mvr, E=hνL = mvr,\ E = h\nu[ML2T−1][ML^{2}T^{-1}]
Pressure, stress, Young's modulusF/AF/A[ML−1T−2][ML^{-1}T^{-2}]
Surface tension, spring constantF/lF/l[MT−2][MT^{-2}]
Coefficient of viscosityF=ηA dvdzF = \eta A\,\dfrac{dv}{dz}[ML−1T−1][ML^{-1}T^{-1}]
Gravitational constant GF=Gm1m2r2F = \dfrac{Gm_1m_2}{r^{2}}[M−1L3T−2][M^{-1}L^{3}T^{-2}]
Latent heatQ/mQ/m[L2T−2][L^{2}T^{-2}]
Chargeq=Itq = It[AT][AT]
Potential differenceV=W/qV = W/q[ML2T−3A−1][ML^{2}T^{-3}A^{-1}]
Permittivity of free spaceF=q1q24πε0r2F = \dfrac{q_1q_2}{4\pi\varepsilon_0 r^{2}}[M−1L−3T4A2][M^{-1}L^{-3}T^{4}A^{2}]
Permeability of free spaceμ0ε0=1c2\mu_0\varepsilon_0 = \dfrac{1}{c^{2}}[MLT−2A−2][MLT^{-2}A^{-2}]Q
NEET 2022: which quantity has the dimensions MLT⁻²A⁻²? The answer was magnetic permeability.
Magnetic fluxε=dΦdt\varepsilon = \dfrac{d\Phi}{dt}[ML2T−2A−1][ML^{2}T^{-2}A^{-1}]
Stefan constant, Boltzmann constant, Wien's constantσT4, 32kBT, λmT=b\sigma T^{4},\ \tfrac{3}{2}k_BT,\ \lambda_m T = b[MT−3K−4][MT^{-3}K^{-4}], [ML2T−2K−1][ML^{2}T^{-2}K^{-1}], [LK][LK]Q
Re-NEET 2026 combined all three: the dimensions of the Stefan constant divided by the Boltzmann constant, times Wien's constant.
Plane angle, solid angle, strains/r, A/r2, Δl/ls/r,\ A/r^{2},\ \Delta l/l[M0L0T0][M^{0}L^{0}T^{0}]Q
NEET 2022: plane and solid angle have units but no dimensions. NEET 2024: strain and angle have the same dimensions as solid angle.
Each row follows from its defining relation. σT⁴ is power per unit area, and (3/2)k_BT is an energy.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2021 · NEET (UG) 2021 — 12 Sep 2021 · Q25Moderate

Example 1 · Units and Measurements · Dimensions and Dimensional Analysis

If EE and GG respectively denote energy and gravitational constant, then EG\dfrac{E}{G} has the dimensions of

Having a unit does not mean having dimensions

Radian and steradian are units, but angle and solid angle are ratios of like quantities, so their dimensions are [M0L0T0][M^{0}L^{0}T^{0}].

Same dimensions, different quantity

Work and torque share [ML2T−2][ML^{2}T^{-2}], and angular momentum and Planck's constant share [ML2T−1][ML^{2}T^{-1}]. Matching dimensions does not make two quantities the same thing.

G carries a negative power of mass

From G=Fr2m1m2G = \dfrac{Fr^{2}}{m_1m_2}, G is [M−1L3T−2][M^{-1}L^{3}T^{-2}]. Dividing by m2m^{2} leaves M−1M^{-1}, not M−2M^{-2}.

Concept 2 of 3: Principle of homogeneity

You cannot add 5 metres to 3 seconds. In any correct equation every term that is added, subtracted or set equal must have the same dimensions. So if an unknown constant sits next to a known quantity in a sum, it must carry that quantity's dimensions. That one idea finds most unknown constants.

Definition

  • Principle of homogeneity: every term on both sides of a correct equation has the same dimensions.
  • If x=a+bt+ct2x = a + bt + ct^{2}, then [x]=[a]=[bt]=[ct2][x] = [a] = [bt] = [ct^{2}], so [b]=[x]/[t][b] = [x]/[t] and [c]=[x]/[t2][c] = [x]/[t^{2}].
  • A constant added to a quantity has that quantity's dimensions: in t2+Bt^{2} + B, [B]=[T2][B] = [T^{2}].
  • The argument of sin, cos, exp and log is dimensionless: in sin⁡(ωt)\sin(\omega t), [ω]=[T−1][\omega] = [T^{-1}].
  • A dimensionally correct equation may still be wrong: dimensions cannot test a pure number such as 12\tfrac{1}{2} or 2π2\pi.

Homogeneity

x=a+bt+ct2 ⇒ [x]=[a]=[bt]=[ct2]x = a + bt + ct^{2} \ \Rightarrow\ [x] = [a] = [bt] = [ct^{2}]

Worked example

The position of a particle is x=at+bt3x = at + bt^{3}, with x in metres and t in seconds. Find the dimensions of a and b.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · Re-NEET (UG) 2024 — 23 Jun 2024 · Q40Hard

Example 2 · Units and Measurements · Dimensions and Dimensional Analysis

The potential energy of a particle moving along xx-direction varies as V=Ax2x+BV = \dfrac{Ax^2}{\sqrt{x} + B}. The dimensions of A2B\dfrac{A^2}{B} are:

Correct dimensions, wrong formula

s=ut+at2s = ut + at^{2} passes the dimension test but is wrong; the right one has 12at2\tfrac{1}{2}at^{2}. Dimensions can reject a formula, never prove it.

A constant takes the dimensions of what it is added to

In (P+aV2)\left(P + \dfrac{a}{V^{2}}\right), with P a pressure and V a volume, the term aV2\dfrac{a}{V^{2}} is a pressure, so a is [ML5T−2][ML^{5}T^{-2}]. Match the whole term, including its power, not the bare letter.

Concept 3 of 3: Deriving relations and changing base quantities

If you know which quantities a result depends on, you can guess the formula by making the dimensions match. Write the result as a product of powers, compare the powers of M, L and T on both sides, and solve. The same trick converts a value from one system of units to another, or rewrites a quantity using new base quantities.

Definition

  • Finding a relation: write Q=k axbyczQ = k\,a^{x}b^{y}c^{z}, put in dimensions, equate the powers of M, L and T, and solve for x, y, z. The constant k is dimensionless and cannot be found this way.
  • The method works for at most three unknown powers when only M, L and T appear, and it cannot handle a sum of terms.
  • Converting units: n2=n1[M1M2]a[L1L2]b[T1T2]cn_2 = n_1\left[\dfrac{M_1}{M_2}\right]^{a}\left[\dfrac{L_1}{L_2}\right]^{b}\left[\dfrac{T_1}{T_2}\right]^{c} for a quantity of dimensions [MaLbTc][M^{a}L^{b}T^{c}]. For example 1 N=1051\ \text{N} = 10^{5} dyne.
  • New base quantities: to write a quantity in, say, force, length and time, write it as FxLyTzF^{x}L^{y}T^{z} and match powers of M, L and T in the usual way.

Method of dimensions

Q=k axbycz,n2=n1[M1M2]a[L1L2]b[T1T2]cQ = k\,a^{x}b^{y}c^{z}, \qquad n_2 = n_1\left[\frac{M_1}{M_2}\right]^{a}\left[\frac{L_1}{L_2}\right]^{b}\left[\frac{T_1}{T_2}\right]^{c}

Worked example

The period t of a simple pendulum may depend on the bob's mass m, the length l and g. Find the form of the relation.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2021 · NEET (UG) 2021 — 12 Sep 2021 · Q35Moderate

Example 3 · Units and Measurements · Dimensions and Dimensional Analysis

If force [F][F], acceleration [A][A] and time [T][T] are chosen as the fundamental physical quantities. Find the dimensions of energy.

Converting time squares the factor

Going from seconds to minutes in an acceleration multiplies by 60260^{2}, not 60, because time appears as T−2T^{-2}.

Check the answer by putting it back

After solving for the powers, rebuild the dimensions from your answer. A sign slip in one power is the usual way to land on a wrong option.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

  • Principle of homogeneity

    Homogeneity

    x=a+bt+ct2 ⇒ [x]=[a]=[bt]=[ct2]x = a + bt + ct^{2} \ \Rightarrow\ [x] = [a] = [bt] = [ct^{2}]
  • Deriving relations and changing base quantities

    Method of dimensions

    Q=k axbycz,n2=n1[M1M2]a[L1L2]b[T1T2]cQ = k\,a^{x}b^{y}c^{z}, \qquad n_2 = n_1\left[\frac{M_1}{M_2}\right]^{a}\left[\frac{L_1}{L_2}\right]^{b}\left[\frac{T_1}{T_2}\right]^{c}

Reference tables (1)

Dimensional formulae of common quantities17 rows
QuantityDefining relationDimensions
ForceF=maF = ma[MLT−2][MLT^{-2}]
Work, energy, torqueW=FsW = Fs[ML2T−2][ML^{2}T^{-2}]
PowerP=W/tP = W/t[ML2T−3][ML^{2}T^{-3}]
Momentum, impulsep=mvp = mv[MLT−1][MLT^{-1}]
Angular momentum, Planck's constantL=mvr, E=hνL = mvr,\ E = h\nu[ML2T−1][ML^{2}T^{-1}]
Pressure, stress, Young's modulusF/AF/A[ML−1T−2][ML^{-1}T^{-2}]
Surface tension, spring constantF/lF/l[MT−2][MT^{-2}]
Coefficient of viscosityF=ηA dvdzF = \eta A\,\dfrac{dv}{dz}[ML−1T−1][ML^{-1}T^{-1}]
Gravitational constant GF=Gm1m2r2F = \dfrac{Gm_1m_2}{r^{2}}[M−1L3T−2][M^{-1}L^{3}T^{-2}]
Latent heatQ/mQ/m[L2T−2][L^{2}T^{-2}]
Chargeq=Itq = It[AT][AT]
Potential differenceV=W/qV = W/q[ML2T−3A−1][ML^{2}T^{-3}A^{-1}]
Permittivity of free spaceF=q1q24πε0r2F = \dfrac{q_1q_2}{4\pi\varepsilon_0 r^{2}}[M−1L−3T4A2][M^{-1}L^{-3}T^{4}A^{2}]
Permeability of free spaceμ0ε0=1c2\mu_0\varepsilon_0 = \dfrac{1}{c^{2}}[MLT−2A−2][MLT^{-2}A^{-2}]Q
NEET 2022: which quantity has the dimensions MLT⁻²A⁻²? The answer was magnetic permeability.
Magnetic fluxε=dΦdt\varepsilon = \dfrac{d\Phi}{dt}[ML2T−2A−1][ML^{2}T^{-2}A^{-1}]
Stefan constant, Boltzmann constant, Wien's constantσT4, 32kBT, λmT=b\sigma T^{4},\ \tfrac{3}{2}k_BT,\ \lambda_m T = b[MT−3K−4][MT^{-3}K^{-4}], [ML2T−2K−1][ML^{2}T^{-2}K^{-1}], [LK][LK]Q
Re-NEET 2026 combined all three: the dimensions of the Stefan constant divided by the Boltzmann constant, times Wien's constant.
Plane angle, solid angle, strains/r, A/r2, Δl/ls/r,\ A/r^{2},\ \Delta l/l[M0L0T0][M^{0}L^{0}T^{0}]Q
NEET 2022: plane and solid angle have units but no dimensions. NEET 2024: strain and angle have the same dimensions as solid angle.
Each row follows from its defining relation. σT⁴ is power per unit area, and (3/2)k_BT is an energy.

Watch out for (7)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper