PYQ Vault

NEET Physics · Units and Measurements

Errors in Measurement

Every measurement carries some error: the kinds of error, how big an error is, and how the errors of measured values carry into a result worked out from them.

Why this matters

Four NEET questions, from 2023 to 2025. One asks which kind of error comes from unpredictable changes in temperature and supply voltage (2023). Three combine errors: a wire's density from its mass, radius and length (2023), a resistance from a voltage and a current each given with its error (Re-NEET 2024), and the percentage error of a product of powers (2025).

Concept 1 of 3: Kinds of error, and how big an error is

No measurement is perfect. Some errors push every reading the same way, like a scale whose zero is off: these are systematic. Others push readings up and down at random, like a sudden change in room temperature: these are random, and they shrink when you repeat the measurement and take the mean.

Definition

  • Systematic errors push readings in one direction: instrumental errors, errors from an imperfect method, and personal errors of the observer.
  • Random errors come from unpredictable changes in the conditions, such as temperature, pressure or supply voltage. They are reduced by taking many readings and averaging.
  • Least count error comes from the smallest division the instrument can read.
  • For readings a1,a2,…,ana_1, a_2, \ldots, a_n: the mean aˉ\bar{a} is the best value, the absolute error of each is ∣ai−aˉ∣|a_i - \bar{a}|, and the mean absolute error Δaˉ\Delta\bar{a} is their average.
  • Relative error =Δaˉaˉ= \dfrac{\Delta\bar{a}}{\bar{a}}; percentage error =Δaˉaˉ×100%= \dfrac{\Delta\bar{a}}{\bar{a}} \times 100\%. The result is written aˉ±Δaˉ\bar{a} \pm \Delta\bar{a}.
  • Accuracy is how close a value is to the true value. Precision is the resolution, the limit to which it is measured.
ErrorCauseHow to reduce it
Instrumental errorFaulty design or calibration, such as a zero errorCorrect for it, or use a better instrument
Error of methodAn imperfect technique, such as a thermometer under the armpit reading below the true body temperatureImprove the procedure
Personal errorThe observer's bias or carelessness, such as reading a scale at an angle (parallax)Take care while reading
Random errorUnpredictable changes in temperature, pressure or supply voltageRepeat many times and take the mean
NEET 2023 asked which error comes from unpredictable changes in temperature and voltage supply: random errors.
Least count errorThe smallest division the instrument can showUse a finer instrument and repeat the reading
The first three are systematic: they push every reading the same way, so averaging does not remove them.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2023 · NEET (UG) 2023 — 07 May 2023 · Q34Easy

Example 1 · Units and Measurements · Errors in Measurement

The errors in the measurement which arise due to unpredictable fluctuations in temperature and voltage supply are

Averaging only beats random errors

Repeating a reading and taking the mean reduces random errors. A systematic error, such as a zero error, stays in every reading and in the mean.

Precise is not the same as accurate

Readings can agree closely with each other and still all be wrong by the same amount. That is high precision and low accuracy.

Concept 2 of 3: Combining errors in sums, differences, products and quotients

Errors always make a result less certain, never more. When you add or subtract two values, their absolute errors add, even for a difference. When you multiply or divide, it is the relative errors that add. Take the worst case: assume every error pushes the same way.

Definition

  • Sum or difference, Z=A±BZ = A \pm B: ΔZ=ΔA+ΔB\Delta Z = \Delta A + \Delta B. The absolute errors add.
  • Product or quotient, Z=ABZ = AB or Z=A/BZ = A/B: ΔZZ=ΔAA+ΔBB\dfrac{\Delta Z}{Z} = \dfrac{\Delta A}{A} + \dfrac{\Delta B}{B}. The relative errors add.
  • To give a product or quotient as Z±ΔZZ \pm \Delta Z: find Z, add the relative errors, then multiply that sum by Z.

Combining errors

Z=A±B: ΔZ=ΔA+ΔB,Z=AB or AB: ΔZZ=ΔAA+ΔBBZ = A \pm B:\ \Delta Z = \Delta A + \Delta B, \qquad Z = AB \text{ or } \frac{A}{B}:\ \frac{\Delta Z}{Z} = \frac{\Delta A}{A} + \frac{\Delta B}{B}

Worked example

The temperatures of a liquid before and after heating are (25.3±0.2)(25.3 \pm 0.2) °C and (40.6±0.2)(40.6 \pm 0.2) °C. Find the rise in temperature with its error.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2024 · Re-NEET (UG) 2024 — 23 Jun 2024 · Q13Moderate

Example 2 · Units and Measurements · Errors in Measurement

In an electrical circuit, the voltage is measured as V=(200±4)V = (200 \pm 4) volt and the current is measured as I=(20±0.2)I = (20 \pm 0.2) A. The value of the resistance is:

A difference still adds the errors

For Z=A−BZ = A - B the error is ΔA+ΔB\Delta A + \Delta B, never ΔA−ΔB\Delta A - \Delta B. Errors never cancel.

Absolute for sums, relative for products

In a sum the absolute errors add; in a product or quotient the relative (or percentage) errors add. Adding absolute errors for a quotient gives a wrong answer.

Concept 3 of 3: Errors in a product of powers

If a measured value is squared, its error counts twice; if it is cubed, three times. A square root counts half. So in a formula built from powers, each relative error is multiplied by its power, and then they are all added, whether the quantity is on top or at the bottom.

Definition

  • For Z=ApBqCrZ = \dfrac{A^{p}B^{q}}{C^{r}}: ΔZZ=pΔAA+qΔBB+rΔCC\dfrac{\Delta Z}{Z} = p\dfrac{\Delta A}{A} + q\dfrac{\Delta B}{B} + r\dfrac{\Delta C}{C}.
  • Every term is added, including those in the denominator. A square root brings a factor 12\tfrac{1}{2}.
  • Exact numbers such as 12\tfrac{1}{2}, π\pi or 4π24\pi^{2} carry no error.
  • The quantity with the highest power brings in the largest share of the error, so it should be measured most carefully.

Error in a product of powers

Z=ApBqCr ⇒ ΔZZ=pΔAA+qΔBB+rΔCCZ = \frac{A^{p}B^{q}}{C^{r}} \ \Rightarrow\ \frac{\Delta Z}{Z} = p\frac{\Delta A}{A} + q\frac{\Delta B}{B} + r\frac{\Delta C}{C}

Worked example

In a pendulum experiment g=4π2lT2g = \dfrac{4\pi^{2}l}{T^{2}}. The length l is measured with a 2% error and the period T with a 1% error. Find the percentage error in g.
Practise this conceptself-check · 4 quick reps

The same idea in a real exam question:

NEET · 2025 · NEET (UG) 2025 — 04 May 2025 · Q42Easy

Example 3 · Units and Measurements · Errors in Measurement

A physical quantity PP is related to four observations a,b,ca, b, c and dd as follows: P=a3b2/cdP = a^3 b^2 / c\sqrt{d}. The percentage errors of measurement in a,b,ca, b, c and dd are 1%, 3%, 2%, and 4% respectively. The percentage error in the quantity PP is

The power multiplies the error

For r2r^{2} the relative error is 2Δrr2\dfrac{\Delta r}{r}. Leaving out the 2 is the most common slip in a density or volume question.

Denominator terms are added too

A quantity in the denominator still adds its error. In Z=A/C2Z = A/C^{2} the error is ΔAA+2ΔCC\dfrac{\Delta A}{A} + 2\dfrac{\Delta C}{C}, not a difference.

A square root halves the error

For d\sqrt{d} the relative error is 12Δdd\tfrac{1}{2}\dfrac{\Delta d}{d}. A 6% error in d becomes 3%, not 6% or 12%.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

  • Combining errors in sums, differences, products and quotients

    Combining errors

    Z=A±B: ΔZ=ΔA+ΔB,Z=AB or AB: ΔZZ=ΔAA+ΔBBZ = A \pm B:\ \Delta Z = \Delta A + \Delta B, \qquad Z = AB \text{ or } \frac{A}{B}:\ \frac{\Delta Z}{Z} = \frac{\Delta A}{A} + \frac{\Delta B}{B}
  • Errors in a product of powers

    Error in a product of powers

    Z=ApBqCr ⇒ ΔZZ=pΔAA+qΔBB+rΔCCZ = \frac{A^{p}B^{q}}{C^{r}} \ \Rightarrow\ \frac{\Delta Z}{Z} = p\frac{\Delta A}{A} + q\frac{\Delta B}{B} + r\frac{\Delta C}{C}

Reference tables (1)

Kinds of error, and how big an error is5 rows
ErrorCauseHow to reduce it
Instrumental errorFaulty design or calibration, such as a zero errorCorrect for it, or use a better instrument
Error of methodAn imperfect technique, such as a thermometer under the armpit reading below the true body temperatureImprove the procedure
Personal errorThe observer's bias or carelessness, such as reading a scale at an angle (parallax)Take care while reading
Random errorUnpredictable changes in temperature, pressure or supply voltageRepeat many times and take the mean
NEET 2023 asked which error comes from unpredictable changes in temperature and voltage supply: random errors.
Least count errorThe smallest division the instrument can showUse a finer instrument and repeat the reading
The first three are systematic: they push every reading the same way, so averaging does not remove them.

Watch out for (7)

Test yourself on a real paper

Sit a past NEET paper, timed and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.

Sit a NEET past paper