PYQ Vault

NEET Physics · Formula sheet

System of Particles and Rotational Motion formulas

10 formulas and 28 common traps for NEET Physics System of Particles and Rotational Motion, grouped by subtopic.

Full notes with worked examples

Centre of Mass and Momentum

Learn this subtopic in the notes

Locating the centre of mass

Centre of mass

xcm=∑mixi∑mi,r1=m2 dm1+m2x_{cm} = \frac{\sum m_i x_i}{\sum m_i}, \qquad r_1 = \frac{m_2\,d}{m_1 + m_2}
  • xcmx_{cm}x coordinate of the centre of mass
  • r1r_1distance of the centre of mass from the first mass
  • dddistance between the two masses

Motion of the centre of mass and conservation of momentum

Momentum of a system

P⃗=∑miv⃗i=Mv⃗cm,Ma⃗cm=F⃗ext\vec{P} = \sum m_i\vec{v}_i = M\vec{v}_{cm}, \qquad M\vec{a}_{cm} = \vec{F}_{ext}

Common traps

The other mass goes on top

The distance of the centre of mass from m1m_1 is m2dm1+m2\dfrac{m_2d}{m_1 + m_2}. Putting m1m_1 on top puts the centre of mass nearer the lighter mass, which is backwards.

A cut-out shifts the centre away from the hole

Removing a piece moves the centre of mass of what is left away from the hole, never towards it. Subtract the piece as a negative mass.

Momenta add as vectors

Two equal momenta p at right angles add to 2 p\sqrt{2}\,p, not 2p. In an explosion from rest the last piece carries exactly this resultant, in the opposite direction.

Inner forces cannot move the centre of mass

An explosion, a recoil or a collision inside the system changes the pieces' velocities but not the velocity of the centre of mass. Only an external force can do that.

Equal momenta, unequal speeds

Two pieces from rest have equal momenta, so the lighter piece moves faster: the speeds are in the inverse ratio of the masses.

Torque and Equilibrium

Learn this subtopic in the notes

Torque and the moment of a force

Torque

τ⃗=r⃗×F⃗,τ=rFsin⁡θ=F d⊥\vec{\tau} = \vec{r} \times \vec{F}, \qquad \tau = rF\sin\theta = F\,d_{\perp}
  • r⃗\vec{r}position of the point where the force acts, from the chosen point
  • θ\thetaangle between r and F
  • d⊥d_{\perp}lever arm: perpendicular distance to the line of the force

Equilibrium of a rigid body

Conditions for equilibrium

∑F⃗=0,∑τ⃗=0\sum \vec{F} = 0, \qquad \sum \vec{\tau} = 0

Common traps

The lever arm is a perpendicular distance

Use the perpendicular distance from the pivot to the line of the force, not the distance to the point where it acts. A force along the line through the pivot gives no torque at all.

Order matters in the cross product

Torque is r⃗×F⃗\vec{r} \times \vec{F}. Working out F⃗×r⃗\vec{F} \times \vec{r} gives the same size but every component with the wrong sign.

A couple turns but does not push

Two equal and opposite forces on different lines give zero net force yet a torque Fd, so a body can spin up with its centre of mass at rest.

Pick the point that kills the unknowns

Taking moments about the point where an unknown force acts removes it from the torque equation. Taking them about the middle of the body usually leaves two unknowns.

Smooth means no friction

A smooth wall or peg pushes only at right angles to its surface. Any friction a problem needs must come from the rough surface.

Angle with the wall or with the floor

A rod making 60° with a vertical wall makes 30° with the floor. Read which angle is given before you resolve the forces.

Moment of Inertia

Learn this subtopic in the notes

Moment of inertia of standard bodies

Moment of inertia

I=∑miri2,Iring=MR2,Idisc=12MR2,Irod=112ML2,Isphere=25MR2I = \sum m_i r_i^{2}, \qquad I_{\text{ring}} = MR^{2}, \quad I_{\text{disc}} = \tfrac{1}{2}MR^{2}, \quad I_{\text{rod}} = \tfrac{1}{12}ML^{2}, \quad I_{\text{sphere}} = \tfrac{2}{5}MR^{2}
  • rir_iperpendicular distance of a mass from the axis
  • MMmass of the body

Radius of gyration

I=Mk2,k=IMI = Mk^{2}, \qquad k = \sqrt{\frac{I}{M}}
  • kkradius of gyration about the chosen axis

Parallel and perpendicular axis theorems

Axis theorems

I=Icm+Md2,Iz=Ix+IyI = I_{cm} + Md^{2}, \qquad I_z = I_x + I_y
  • IcmI_{cm}moment of inertia about a parallel axis through the centre of mass
  • dddistance between the two parallel axes

Common traps

Distance from the axis, not from a point

In I=∑mr2I = \sum mr^{2} each r is the perpendicular distance to the axis line. A mass lying on the axis adds nothing, however far along the axis it is.

Name the axis every time

A disc has 12MR2\tfrac{1}{2}MR^{2} about its axis but 14MR2\tfrac{1}{4}MR^{2} about a diameter. A value with no axis named is not an answer.

Cutting a body cuts its mass

When part of a body is removed, the mass that is left, not the original M, goes into the formula. The radius may stay the same while the mass does not.

Take the square root

Since k=I/Mk = \sqrt{I/M}, moments of inertia in the ratio 3 : 5 give radii of gyration in the ratio 3:5\sqrt{3} : \sqrt{5}, not 3 : 5.

k is not the radius of the body

A disc of radius R has k=R/2k = R/\sqrt{2} about its axis. Only a thin ring about its own axis has k equal to its radius.

One axis must pass through the centre of mass

I=Icm+Md2I = I_{cm} + Md^{2} only works from an axis through the centre of mass. To go between two other parallel axes, step back to the centre-of-mass axis first.

Flat bodies only

The perpendicular axis theorem holds for a plane body such as a disc, ring or plate. For a sphere or a cylinder it gives wrong answers.

Subtract about the same axis

For a body with a hole, the piece's moment of inertia must be taken about the same axis as the whole body before subtracting, using Icm+md2I_{cm} + md^{2} for the piece.

Rotation and Rolling

Learn this subtopic in the notes

Rotational kinematics

Constant angular acceleration

ω=ω0+αt,θ=ω0t+12αt2,ω2=ω02+2αθ\omega = \omega_0 + \alpha t, \qquad \theta = \omega_0 t + \tfrac{1}{2}\alpha t^{2}, \qquad \omega^{2} = \omega_0^{2} + 2\alpha\theta
  • ω0\omega_0initial angular velocity
  • α\alphaangular acceleration
  • θ\thetaangle turned, in radians

Torque, angular momentum and its conservation

Rotational dynamics

L=Iω,τ=Iα=dLdt,I1ω1=I2ω2,K=12Iω2=L22IL = I\omega, \qquad \tau = I\alpha = \frac{dL}{dt}, \qquad I_1\omega_1 = I_2\omega_2, \qquad K = \tfrac{1}{2}I\omega^{2} = \frac{L^{2}}{2I}
  • LLangular momentum
  • τ\tautorque about the axis
  • IImoment of inertia about the axis

Rolling without slipping

Rolling

vcm=ωR,K=12mv2(1+k2R2),v=2gh1+k2/R2v_{cm} = \omega R, \qquad K = \tfrac{1}{2}mv^{2}\left(1 + \frac{k^{2}}{R^{2}}\right), \qquad v = \sqrt{\frac{2gh}{1 + k^{2}/R^{2}}}
  • vcmv_{cm}speed of the centre
  • kkradius of gyration about the centre
  • RRradius of the rolling body

Common traps

Convert rpm before you start

The equations need radians and seconds. 900 rpm is 900×2π60=30π900 \times \dfrac{2\pi}{60} = 30\pi rad/s; putting 900 straight in gives an answer wrong by a factor of about 10.

Turns are not radians

The equations give θ in radians. Divide by 2π2\pi to get the number of revolutions.

Angular acceleration lies along the axis

For rotation about a fixed axis, ω⃗\vec{\omega} and α⃗\vec{\alpha} both point along the axis, not along the tangent or the radius of the circle a particle moves on.

Angular momentum is kept, kinetic energy is not

With no outside torque, IωI\omega stays fixed while I changes. The kinetic energy L22I\dfrac{L^{2}}{2I} then changes, so do not use energy conservation in its place.

Period goes with I, speed goes against it

From Iω=I\omega = constant, ω falls when I rises, so the period T=2πωT = \dfrac{2\pi}{\omega} rises in the same ratio as I.

A straight-line motion can have angular momentum

A particle moving in a straight line has angular momentum mvd⊥mvd_{\perp} about any point off its line. It is zero only about points on the line itself.

Rolling energy includes the spin

A rolling body's kinetic energy is 12mv2(1+k2/R2)\tfrac{1}{2}mv^{2}\left(1 + k^{2}/R^{2}\right), not 12mv2\tfrac{1}{2}mv^{2}. That is why a rolling body reaches the bottom of a slope slower than one sliding without friction.

Shape decides the race, not mass

Rolling speed and acceleration depend only on k2/R2k^{2}/R^{2}. A heavy disc and a light disc of any size reach the bottom together.

Rolling needs friction

On a perfectly smooth slope nothing makes the body spin, so it slides with acceleration gsin⁡θg\sin\theta. Rolling without slipping down a slope needs a rough surface.

More NEET Physics formula sheets