PYQ Vault

SSC CGL Tier II Maths · Mensuration 3D

Cones

A cone is built on one right triangle of radius, height and slant height; find the missing side, then use one third of the cylinder's volume or the fan-shaped curved surface.

Why this matters

10 questions in the Tier II bank, 8 EASY and 2 MODERATE. In nearly all of them the first step is the same: find the third side of the cone's right triangle.

Concept 1 of 2: The cone's right triangle

Cut a cone from its tip to the centre of its base and the cut face shows a right triangle: the radius along the floor, the height standing up, the slant height as the long side. Most cone stems give two of these, or their ratio, and Pythagoras gives the third.

Definition

  • l2=r2+h2l^2 = r^2 + h^2.
  • Triples worth knowing: 3, 4, 5; 5, 12, 13; 7, 24, 25; 8, 15, 17; 20, 21, 29; 12, 35, 37.
  • A ratio such as r:h=3:4r : h = 3 : 4 means r=3kr = 3k, h=4kh = 4k, l=5kl = 5k; find kk from the one number given.
  • 'Curved surface is nn times the base area' means πrl=nπr2\pi rl = n\pi r^2, so l=nrl = nr.

Slant height and volume

l=r2+h2,V=13πr2hl = \sqrt{r^2 + h^2}, \quad V = \tfrac{1}{3}\pi r^2 h
αhrl

l² = r² + h², sin α = r ÷ l. Volume ⅓πr²h uses h; curved surface πrl uses l.

Worked example

A cone's radius and height are in the ratio 5 : 12 and its slant height is 26 cm. Find its volume.
Practise this conceptself-check · 3 quick reps

The same idea in a real exam question:

SSC CGL Tier II · 2024 · Tier II (CGL 2024), 20 Jan 2025 · Q27Easy

Example 1 · Mensuration 3D · Cones

If the diameter of the base of a cone is 56 cm and its curved surface area is 3080 cm2\text{cm}^2, then what will be its volume (in cm3\text{cm}^3)? (Use π=22/7\pi = 22/7)

Putting the slant height into the volume

The volume uses the vertical height: 13πr2h\frac{1}{3}\pi r^2 h. Using ll in its place gives a volume that is too big.

Concept 2 of 2: Cone surfaces, and a cone on a hemisphere

A cone's curved surface unrolls into a fan whose area is πrl\pi rl. A solid cone adds its base circle. On a toy made of two solids glued together, only the outside counts: the circle where they meet is hidden inside.

Definition

  • Curved surface =πrl= \pi rl; total surface of a solid cone =πr(l+r)= \pi r(l + r).
  • Curved surface ÷\div base area =lr= \frac{l}{r}.
  • Cone on a hemisphere of the same radius: outer surface =πrl+2πr2= \pi rl + 2\pi r^2; volume =13πr2h+23πr3= \frac{1}{3}\pi r^2 h + \frac{2}{3}\pi r^3.

Cone surfaces

CSA=πrl,TSA=πr(l+r)\text{CSA} = \pi r l, \quad \text{TSA} = \pi r(l + r)

Worked example

A solid cone has radius 9 cm and height 40 cm. Find its total surface area.
Practise this conceptself-check · 3 quick reps

The same idea in a real exam question:

SSC CGL Tier II · 2024 · Tier II (CGL 2024), 18 Jan 2025 · Q21Moderate

Example 2 · Mensuration 3D · Cones

A toy is in the form of a cone mounted on a hemisphere. The radius of the hemisphere and that of the cone is 36 cm and height of the cone is 105 cm. The total surface area (in cm2\text{cm}^2) of the toy is:

Counting the circle where two solids join

On a cone set on a hemisphere, the flat circle between them is inside the toy. The surface is πrl+2πr2\pi rl + 2\pi r^2, with no πr2\pi r^2 added for the joint.

Summary — formulas & gotchas at a glance

A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.

Formulas (2)

Watch out for (2)

Test yourself on Mensuration 3D

20 past SSC CGL Tier II questions from this chapter, timed at 19 minutes and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.