SSC CGL Tier II Maths · Mensuration 3D
Cylinders
A cylinder is a circle stacked to a height: its volume is base area times height, its curved wall unrolls into a rectangle, and a pipe is one cylinder with another taken out.
Why this matters
15 questions in the Tier II bank, 12 EASY and 3 MODERATE. Half of them hand you a surface or a volume and ask you to work back to the radius or the height.
Concept 1 of 3: Volume and surfaces of a cylinder
Definition
- Volume ; curved surface ; total surface .
- From the circumference : , and the curved surface is simply .
- Base area volume height.
- With , a radius that is a multiple of 7 cancels the 7 at once.
Cylinder
Worked example
Practise this conceptself-check · 3 quick reps
The same idea in a real exam question:
Example 1 · Mensuration 3D · Cylinders
Using the diameter as the radius
Concept 2 of 3: Working back from a surface or a volume
Definition
- Volume curved surface , so .
- Given the total surface and the radius: .
- A link like 'height is three times the radius' turns any surface or volume into an equation in alone.
- 'Curved surface is a third of the total' gives , so .
Volume over curved surface
Worked example
Practise this conceptself-check · 3 quick reps
The same idea in a real exam question:
Example 2 · Mensuration 3D · Cylinders
Counting one end, or none
Concept 3 of 3: Hollow and drilled cylinders
Definition
- Metal in a pipe length length.
- Thickness ; find the inner radius from the outer one and the thickness first.
- Volume left after drilling outer volume volume of the hole.
- Surface after drilling: add the hole's inside surface and take off any flat face the hole cut away.
Metal in a hollow cylinder
Worked example
Practise this conceptself-check · 3 quick reps
The same idea in a real exam question:
Example 3 · Mensuration 3D · Cylinders
Subtracting the radii before squaring
Summary — formulas & gotchas at a glance
A revision cheat-sheet for the formulas and gotchas above. Click any concept name to jump back to its full explanation.
Formulas (3)
- Volume and surfaces of a cylinder
Cylinder
- Working back from a surface or a volume
Volume over curved surface
- Hollow and drilled cylinders
Metal in a hollow cylinder
Watch out for (3)
- Using the diameter as the radius→ Volume and surfaces of a cylinder
- Counting one end, or none→ Working back from a surface or a volume
- Subtracting the radii before squaring→ Hollow and drilled cylinders
Test yourself on Mensuration 3D
20 past SSC CGL Tier II questions from this chapter, timed at 19 minutes and marked the way the exam marks it. You see your score and every answer the moment you finish. Free to start.