PYQ Vault

NEET Chemistry · Formula sheet

Chemical Kinetics formulas

9 formulas, 1 reference table and 26 common traps for NEET Chemistry Chemical Kinetics, grouped by subtopic.

Full notes with worked examples

Rate and Rate Law

Learn this subtopic in the notes

Rate of reaction and the rate law

Rate law

rate=k[A]x[B]y,order=x+y\text{rate} = k[\text{A}]^{x}[\text{B}]^{y}, \qquad \text{order} = x + y
  • kkrate constant
  • x,yx, yorders in A and B, found by experiment

Finding the order from initial rates

Order from two experiments, B fixed

r2r1=([A]2[A]1)x\frac{r_2}{r_1} = \left(\frac{[\text{A}]_2}{[\text{A}]_1}\right)^{x}

Units of the rate constant

Unit of k for order n

k=rate[A]n  ⇒  unit of k=(mol L−1)1−n s−1k = \frac{\text{rate}}{[\text{A}]^{n}} \;\Rightarrow\; \text{unit of } k = (\text{mol L}^{-1})^{1-n}\,\text{s}^{-1}

Common traps

The powers are not the coefficients

The orders in a rate law come from experiment. For a complex reaction they need not match the numbers in the balanced equation, so never write the rate law straight from the equation.

Divide by the coefficient

The rate of a reaction is the rate of change of a species divided by its coefficient. In 2N2O5→4NO2+O22\text{N}_2\text{O}_5 \rightarrow 4\text{NO}_2 + \text{O}_2, NO2\text{NO}_2 forms twice as fast as N2O5\text{N}_2\text{O}_5 is used up.

Order and molecularity are different

Order can be zero or a fraction and applies to any reaction. Molecularity is a whole number and has meaning only for an elementary reaction (a single step).

Change one concentration at a time

Only compare two experiments in which a single concentration differs. A pair in which both [A] and [B] change mixes the two orders and gives neither.

The order is the power, not the factor

When doubling [A] makes the rate four times, the order is 2, because 22=42^{2} = 4. It is not 4.

Rate keeps one unit, k does not

The rate is always in mol L⁻¹ s⁻¹ whatever the order. It is the unit of k that changes, as (mol L−1)1−n s−1(\text{mol L}^{-1})^{1-n}\,\text{s}^{-1}.

First order has no concentration unit

For a first-order reaction 1−n=01 - n = 0, so k is in s⁻¹ (or min⁻¹) alone. That is why a first-order k does not depend on the unit chosen for concentration.

Integrated Rate Laws and Half-Life

Learn this subtopic in the notes

Zero-order reactions

Zero order

[R]=[R]0−kt,t1/2=[R]02k[\text{R}] = [\text{R}]_0 - kt, \qquad t_{1/2} = \frac{[\text{R}]_0}{2k}

First-order reactions

First order

k=2.303tlog⁡[R]0[R],[R]=[R]0 e−ktk = \frac{2.303}{t}\log\frac{[\text{R}]_0}{[\text{R}]}, \qquad [\text{R}] = [\text{R}]_0\,e^{-kt}
  • [R]0[\text{R}]_0concentration at the start
  • [R][\text{R}]concentration after time t

Half-life of a first-order reaction

First-order half-life

t1/2=0.693k,[R][R]0=(12)n,n=tt1/2t_{1/2} = \frac{0.693}{k}, \qquad \frac{[\text{R}]}{[\text{R}]_0} = \left(\frac{1}{2}\right)^{n}, \quad n = \frac{t}{t_{1/2}}

Plots that show the order

PlotZero orderFirst order
[R] against tStraight line falling, slope −k-k, intercept [R]0[\text{R}]_0A curve falling more and more slowlyQ
NEET 2026: a straight falling line of [R] against t means zero order.
ln[R] against tA curveStraight line falling, slope −k-k
log([R]₀/[R]) against tA curveStraight line through the origin, slope k2.303\dfrac{k}{2.303}
Rate against [R]Flat line, rate=k\text{rate} = kStraight line through the origin, slope kk
NEET 2022: the flat line, read as rate against concentration, is zero order.
Half-life against [R]₀Straight line through the origin, slope 12k\dfrac{1}{2k}Flat line, t1/2=0.693kt_{1/2} = \dfrac{0.693}{k}
NEET 2022: the flat line, read as half-life against concentration, is first order.

Common traps

Zero-order half-life grows with the start

For a zero-order reaction t1/2=[R]02kt_{1/2} = \dfrac{[\text{R}]_0}{2k}, so doubling the starting concentration doubles the half-life. Only a first-order half-life is independent of it.

Watch the coefficient

For 2A→B2\text{A} \rightarrow \text{B} with rate =k= k, the rate is −12d[A]dt-\dfrac{1}{2}\dfrac{d[\text{A}]}{dt}, so A is used up at 2k, not k.

Use what is left, not what has reacted

The ratio in the log is [R]0[R]\dfrac{[\text{R}]_0}{[\text{R}]}, with [R] the amount LEFT. If 75% has reacted, 25% is left and the ratio is 4, not 43\dfrac{4}{3}.

2.303 goes with log, not ln

k=1tln⁡[R]0[R]=2.303tlog⁡[R]0[R]k = \dfrac{1}{t}\ln\dfrac{[\text{R}]_0}{[\text{R}]} = \dfrac{2.303}{t}\log\dfrac{[\text{R}]_0}{[\text{R}]}. Writing 2.303 with ln, or leaving it out with log, puts the answer out by a factor of 2.303.

The time unit carries into k

If t is in minutes, k comes out in min⁻¹. Change both to seconds (or both to minutes) before comparing with an option.

First-order half-life ignores the start

t1/2=0.693kt_{1/2} = \dfrac{0.693}{k} has no concentration in it. Doubling or halving [R]0[\text{R}]_0 leaves a first-order half-life unchanged.

Two half-lives leave a quarter

After one half-life half is left; after two, half of that half, so 25% remains. The reactant is not used up after two half-lives.

A straight [R] line is zero order

A first-order reaction gives a curve when [R] is plotted against t. Its straight line comes from ln[R] against t. A falling straight line of [R] itself means zero order.

Two different flat lines

A flat line of rate against [R] means zero order. A flat line of half-life against [R]0[\text{R}]_0 means first order. The same shape means different orders on different axes.

Temperature and Activation Energy

Learn this subtopic in the notes

Activation energy, energy profiles and catalysts

Enthalpy and the two barriers

ΔH=Ea(f)−Ea(b)\Delta H = E_{a(f)} - E_{a(b)}
  • Ea(f)E_{a(f)}activation energy of the forward reaction
  • Ea(b)E_{a(b)}activation energy of the backward reaction

The Arrhenius equation and its plot

Arrhenius equation

k=A e−Ea/RT,ln⁡k=ln⁡A−EaR⋅1Tk = A\,e^{-E_a/RT}, \qquad \ln k = \ln A - \frac{E_a}{R}\cdot\frac{1}{T}
  • AAArrhenius (frequency) factor, same unit as k
  • EaE_aactivation energy
  • RRgas constant, 8.314 J per K per mol

Activation energy from two temperatures

Two-temperature form

log⁡k2k1=Ea2.303R(T2−T1T1T2)\log\frac{k_2}{k_1} = \frac{E_a}{2.303R}\left(\frac{T_2 - T_1}{T_1 T_2}\right)

Common traps

A catalyst lowers both barriers

A catalyst lowers the forward and the backward activation energies by the same amount. The reactants and products stay where they were, so ΔH\Delta H does not change.

Endothermic means Ea is more than ΔH

In an endothermic reaction the products lie above the reactants and the peak lies above the products, so the forward activation energy is always larger than ΔH\Delta H.

Exothermic means a taller backward barrier

When the products lie below the reactants, the climb back from the products to the peak is the longer one: Ea(b)=Ea(f)+∣ΔH∣E_{a(b)} = E_{a(f)} + |\Delta H|.

The slope is negative

ln k against 1/T is a straight line that falls, with slope −EaR-\dfrac{E_a}{R} and intercept ln A. A line with a positive slope, or one through the origin, does not fit the Arrhenius equation.

ln or log changes the slope

The slope of ln k against 1/T is −EaR-\dfrac{E_a}{R}; the slope of log k against 1/T is −Ea2.303R-\dfrac{E_a}{2.303R}. Mixing them puts EaE_a out by a factor of 2.303.

Ea comes in the units of R

With R in J K⁻¹ mol⁻¹, EaE_a comes out in J mol⁻¹: divide by 1000 for kJ. With R = 1.987 cal K⁻¹ mol⁻¹, it comes out in cal mol⁻¹.

Against 1/T, not T

k against T is a rising curve. The straight line is ln k against 1T\dfrac{1}{T}, and it falls as 1T\dfrac{1}{T} grows.

Kelvin, always

27 °C and 57 °C are 300 K and 330 K. Putting the Celsius numbers into 1T1−1T2\dfrac{1}{T_1} - \dfrac{1}{T_2} gives a wrong answer.

Keep the pair in order

k2k_2 belongs with T2T_2. Swapping one pair and not the other gives a negative activation energy, which is a sign of the slip.

2.303 comes with log

With base-10 logs the formula has 2.303R. With natural logs it is ln⁡k2k1=EaR(1T1−1T2)\ln\dfrac{k_2}{k_1} = \dfrac{E_a}{R}\left(\dfrac{1}{T_1} - \dfrac{1}{T_2}\right), with no 2.303.

More NEET Chemistry formula sheets