PYQ Vault

NEET Chemistry · Formula sheet

Haloalkanes and Haloarenes formulas

5 formulas, 5 reference tables and 28 common traps for NEET Chemistry Haloalkanes and Haloarenes, grouped by subtopic.

Full notes with worked examples

Preparation and Properties

Learn this subtopic in the notes

Haloalkanes from alcohols

Alcohol to alkyl chloride with thionyl chloride

R-OH+SOCl2→R-Cl+SO2↑+HCl↑\text{R-OH} + \text{SOCl}_2 \rightarrow \text{R-Cl} + \text{SO}_2\uparrow + \text{HCl}\uparrow
  • R-OH\text{R-OH}the alcohol
  • SO2 and HCl\text{SO}_2\text{ and HCl}the two gaseous by-products, which escape

Haloalkanes from hydrocarbons and by halogen exchange

Finkelstein reaction

R-X+NaI→dry acetoneR-I+NaX↓(X=Cl, Br)\text{R-X} + \text{NaI} \xrightarrow{\text{dry acetone}} \text{R-I} + \text{NaX}\downarrow \quad (\text{X} = \text{Cl, Br})
  • R-X\text{R-X}an alkyl chloride or bromide
  • NaX\text{NaX}sodium chloride or bromide, which precipitates in dry acetone

Classifying organic halides

ClassCarbon that holds XExample
Primary alkylsp3sp^3 carbon joined to one other carbonCH3CH2CH2Cl\text{CH}_3\text{CH}_2\text{CH}_2\text{Cl}
Secondary alkylsp3sp^3 carbon joined to two other carbonsCH3CHClCH3\text{CH}_3\text{CHClCH}_3
Tertiary alkylsp3sp^3 carbon joined to three other carbons(CH3)3CCl(\text{CH}_3)_3\text{CCl}
Allylicsp3sp^3 carbon next to a C=CCH2=CH-CH2Cl\text{CH}_2\text{=CH-CH}_2\text{Cl}Q
NEET 2023: in C₆H₅-CH=CH-CH(X)-CH₂CH₃ the halogen is on an sp³ carbon next to the C=C, so the compound is an allylic halide.
Benzylicsp3sp^3 carbon joined to a benzene ringC6H5CH2Cl\text{C}_6\text{H}_5\text{CH}_2\text{Cl}
Vinylicsp2sp^2 carbon of a C=CCH2=CHCl\text{CH}_2\text{=CHCl}
Arylsp2sp^2 carbon of a benzene ringC6H5Cl\text{C}_6\text{H}_5\text{Cl}
Allylic and benzylic halides are sp³ at the carbon that holds X; vinylic and aryl halides are sp².

The C-X bond and physical properties

BondBond length in pmBond enthalpy in kJ/molDipole moment in D
CH3-F\text{CH}_3\text{-F}1394521.847Q
NEET 2021: the bond enthalpy order asked was CH₃-F > CH₃-Cl > CH₃-Br > CH₃-I.
CH3-Cl\text{CH}_3\text{-Cl}1783511.860
CH3-Br\text{CH}_3\text{-Br}1932931.830
CH3-I\text{CH}_3\text{-I}2142341.636
The longest bond, C-I, is the weakest. The dipole moment is largest for C-Cl, not C-F.

Common traps

A ring in the molecule does not make a halide benzylic

A halide is benzylic only when the carbon that holds X is joined directly to the benzene ring. If that carbon sits next to a C=C instead, the halide is allylic, even when a ring is present further along the chain.

Allylic and vinylic are not the same

In a vinylic halide X is on a carbon of the double bond, an sp2sp^2 carbon. In an allylic halide X is on the sp3sp^3 carbon one step away from the double bond.

The largest dipole moment is C-Cl, not C-F

Fluorine is the most electronegative halogen, but the C-F bond is very short. CH3-Cl\text{CH}_3\text{-Cl} has the largest dipole moment (1.860 D), a little more than CH3-F\text{CH}_3\text{-F} (1.847 D).

Branching lowers the boiling point

Isomers have the same molecular mass, so the boiling point is decided by surface area. The most branched isomer, such as 2-bromo-2-methylpropane, boils lowest.

The longest C-X bond is the weakest

Bond length rises from C-F (139 pm) to C-I (214 pm), and bond enthalpy falls from 452 to 234 kJ/mol. C-F is the shortest and strongest bond.

PCl₃ and PCl₅ leave different by-products

An alcohol with PCl3\text{PCl}_3 gives H3PO3\text{H}_3\text{PO}_3 (phosphorous acid). An alcohol with PCl5\text{PCl}_5 gives POCl3\text{POCl}_3 and HCl.

Tertiary alcohols do not need ZnCl₂

A tertiary alcohol reacts with concentrated HCl on shaking at room temperature. Anhydrous ZnCl2\text{ZnCl}_2 is needed for primary and secondary alcohols.

Phenols are not converted like alcohols

The methods that turn an alcohol into an alkyl halide do not turn phenol into an aryl halide, because the C-O bond of phenol has partial double bond character.

Count two mirror-image forms only at a chiral carbon

A monochloro product gives two stereoisomers only if the carbon that took the chlorine, or another carbon, now has four different groups. 2-Chloropropane has two CH3\text{CH}_3 groups on that carbon, so it has one form only.

Finkelstein needs dry acetone

The exchange goes forward because NaCl and NaBr are insoluble in dry acetone and precipitate. The solvent is part of the reason the reaction works.

The peroxide effect is for HBr only

A peroxide makes HBr add against Markovnikov's rule. HCl and HI still add by Markovnikov's rule when a peroxide is present.

Nucleophilic Substitution

Learn this subtopic in the notes

SN2 reactions and the products of substitution

Rate law for SN2

Rate=k [RX] [Nu−]\text{Rate} = k\,[\text{RX}]\,[\text{Nu}^-]
  • [RX][\text{RX}]concentration of the haloalkane
  • [Nu−][\text{Nu}^-]concentration of the nucleophile

SN1 reactions and carbocation stability

Rate law for SN1

Rate=k [RX]\text{Rate} = k\,[\text{RX}]
  • [RX][\text{RX}]concentration of the haloalkane; the nucleophile does not appear

Optical activity, chirality and the stereochemistry of substitution

TermMeaningExample
Chiral carbonCarbon joined to four different groupsC-2 of butan-2-ol, CH3CH(OH)CH2CH3\text{CH}_3\text{CH(OH)CH}_2\text{CH}_3
EnantiomersNon-superimposable mirror images(+)-Butan-2-ol and (−)-butan-2-olQ
NEET 2022: the incorrect statement called enantiomers superimposable mirror images.
Racemic mixtureEqual amounts of two enantiomers; zero rotation(±)-Butan-2-ol
InversionProduct has the opposite configuration to the reactantSN2: (−)-2-bromooctane gives (+)-octan-2-ol
RacemisationOne enantiomer turns into a racemic mixtureSN1 on an optically active haloalkane
SN2 inverts the configuration; SN1 gives a racemic mixture.

Common traps

KCN and AgCN give different products

KCN gives an alkyl cyanide (R-CN), because the ion attacks through carbon. AgCN gives an alkyl isocyanide (R-NC), because its nitrogen attacks. In the same way KNO2\text{KNO}_2 gives a nitrite and AgNO2\text{AgNO}_2 a nitroalkane.

SN2 is slowest for tertiary halides

In SN2 the nucleophile attacks the crowded carbon directly, so the order is CH3X\text{CH}_3\text{X} > 1° > 2° > 3°. This is the reverse of the SN1 order.

The strongest C-X bond reacts slowest

The C-F bond is the strongest and the C-I bond the weakest, so for the same alkyl group the reactivity is R-I > R-Br > R-Cl > R-F.

The nucleophile does not set the SN1 rate

Only the slow first step, the loss of the halide ion, decides the rate. So the SN1 rate depends on the haloalkane alone, rate=k[RX]\text{rate} = k[\text{RX}].

Some primary halides react fast by SN1

Benzyl chloride and allyl chloride are primary, yet they react quickly by SN1, because the benzylic and allylic carbocations are stabilised by resonance.

Four different groups, not just four groups

Every saturated carbon has four groups. It is chiral only when all four are different. A carbon with two identical groups, such as two CH3\text{CH}_3 groups, is not chiral.

Inversion with SN2, racemisation with SN1

SN2 attack from the back inverts the configuration. SN1 goes through a flat carbocation that can be attacked from either face, so an optically active haloalkane gives a racemic mixture.

Enantiomers rotate light equally, in opposite directions

The two enantiomers rotate plane polarised light by the same angle, one to the right and one to the left. That is why an equal mixture of them shows no rotation.

Elimination and Haloarenes

Learn this subtopic in the notes

Dehydrohalogenation and the Saytzeff rule

Dehydrohalogenation with alcoholic KOH

R-CH2-CH2-X+KOH (alc)→ΔR-CH=CH2+KX+H2O\text{R-CH}_2\text{-CH}_2\text{-X} + \text{KOH (alc)} \xrightarrow{\Delta} \text{R-CH=CH}_2 + \text{KX} + \text{H}_2\text{O}
  • X\text{X}the halogen, lost from the α-carbon
  • KOH (alc)\text{KOH (alc)}potassium hydroxide in alcohol, acting as a base

Substitution or elimination, and reactions with metals

Reagent on 1-bromopropaneWhat happensProduct
Aqueous KOHSubstitution of Br by OHPropan-1-ol, CH3CH2CH2OH\text{CH}_3\text{CH}_2\text{CH}_2\text{OH}
Alcoholic KOH, heatElimination of HBrPropene, CH3CH=CH2\text{CH}_3\text{CH=CH}_2Q
Re-NEET 2024: alcoholic KOH, then HBr, then aqueous KOH turned 1-bromopropane into propan-2-ol.
KCNSubstitution of Br by CNButanenitrile, CH3CH2CH2CN\text{CH}_3\text{CH}_2\text{CH}_2\text{CN}
Mg in dry etherGrignard reagent formsCH3CH2CH2MgBr\text{CH}_3\text{CH}_2\text{CH}_2\text{MgBr}
Na in dry etherWurtz couplingHexane, CH3(CH2)4CH3\text{CH}_3(\text{CH}_2)_4\text{CH}_3
Aqueous KOH substitutes; alcoholic KOH eliminates.

Making haloarenes and how they react

ReactionReagentsProduct
Chlorination of benzeneCl2\text{Cl}_2, anhydrous FeCl3\text{FeCl}_3, darkChlorobenzeneQ
NEET 2022: benzene with Cl₂ and anhydrous FeCl₃ was the route to chlorobenzene.
Halogenation of tolueneCl2\text{Cl}_2 or Br2\text{Br}_2, Fe, dark2-Halotoluene and 4-halotoluene; not used for fluorineQ
Re-NEET 2024: the method fails for X = F, because fluorine is too reactive.
Sandmeyer reactionBenzenediazonium chloride with Cu2Cl2\text{Cu}_2\text{Cl}_2Chlorobenzene
Replacement by OHChlorobenzene with NaOH, 623 K, 300 atm, then acidPhenol
Chlorination of chlorobenzeneCl2\text{Cl}_2, anhydrous FeCl3\text{FeCl}_31,2-Dichlorobenzene and 1,4-dichlorobenzene (major)
Nitration of chlorobenzeneConcentrated HNO3\text{HNO}_3 and concentrated H2SO4\text{H}_2\text{SO}_41-Chloro-2-nitrobenzene and 1-chloro-4-nitrobenzene (major)
Friedel-Crafts alkylationChlorobenzene with CH3Cl\text{CH}_3\text{Cl}, anhydrous AlCl3\text{AlCl}_31-Chloro-2-methylbenzene and 1-chloro-4-methylbenzene
Wurtz-Fittig reactionChlorobenzene with CH3Cl\text{CH}_3\text{Cl} and Na in dry etherToluene
Fittig reactionChlorobenzene with Na in dry etherBiphenyl
On the ring the halogen is hard to replace, and it sends new groups to the ortho and para positions.

Common traps

Count alkyl groups on the double bond, not hydrogens removed

The Saytzeff product is the alkene whose two doubly bonded carbons carry more alkyl groups in total. It is not the alkene formed by removing the more numerous hydrogens.

No β-hydrogen, no elimination

Dehydrohalogenation needs a hydrogen on a carbon next to the one that holds X. A halide such as CH3Cl\text{CH}_3\text{Cl} has none, so it cannot give an alkene this way.

Aqueous KOH substitutes, alcoholic KOH eliminates

With aqueous KOH a haloalkane gives an alcohol. With alcoholic KOH and heat it gives an alkene. The word in front of KOH decides the product.

Read the condition under HBr

HBr adds to propene by Markovnikov's rule to give 2-bromopropane. With a peroxide such as benzoyl peroxide written on the arrow it adds the other way, giving 1-bromopropane.

Water destroys a Grignard reagent

R-MgX reacts with water to give the hydrocarbon R-H. A Grignard reagent cannot be made or kept in water.

Iodine and fluorine do not go on like chlorine and bromine

Ring iodination is reversible and needs an oxidising agent to remove HI. Fluorine reacts too violently, so fluoroarenes are not made by direct halogenation with a Lewis acid.

Deactivating, yet ortho and para directing

A halogen on the ring makes electrophilic substitution slower than in benzene, but the groups that do enter go to the ortho and para positions, not meta.

A nitro group helps only at ortho or para

A nitro group at the ortho or para position makes a haloarene much easier to substitute with OH−\text{OH}^-. At the meta position it has no such effect.

Aryl halides do not react by SN1

Losing the halide would leave a phenyl cation, which is not stabilised by resonance. So aryl halides do not ionise the way tertiary, allylic and benzylic halides do.

More NEET Chemistry formula sheets