PYQ Vault

NEET Chemistry · Formula sheet

Organic Chemistry – Some Basic Principles and Techniques formulas

3 formulas, 6 reference tables and 33 common traps for NEET Chemistry Organic Chemistry – Some Basic Principles and Techniques, grouped by subtopic.

Full notes with worked examples

Naming and Isomerism

Learn this subtopic in the notes

Bonds, hybridisation and kinds of carbon

Counting bonds

single=1σdouble=1σ+1πtriple=1σ+2π\text{single} = 1\sigma \qquad \text{double} = 1\sigma + 1\pi \qquad \text{triple} = 1\sigma + 2\pi

Structural isomerism and metamerism

KindWhat differsExample (same formula)
Chain isomerismThe carbon skeletonPentane, 2-methylbutane and 2,2-dimethylpropane (C5H12\text{C}_5\text{H}_{12})
Position isomerismWhere the group sits on the chainPropan-1-ol and propan-2-ol (C3H8O\text{C}_3\text{H}_8\text{O})
Functional group isomerismThe functional groupPropanal and propanone (C3H6O\text{C}_3\text{H}_6\text{O})
MetamerismThe alkyl groups on the two sides of one functional groupMethoxypropane and ethoxyethane (C4H10O\text{C}_4\text{H}_{10}\text{O})
NEET 2021 asked which formula shows metamerism; NEET 2026 asked which pair of compounds are metamers.
StereoisomerismOnly the arrangement in spacecis- and trans-but-2-ene (C4H8\text{C}_4\text{H}_8)
Chain, position, functional group and metamerism are all structural isomerism.

Common traps

Count the C-H bonds too

Every C-H bond is a σ bond. In a ring like benzene the ring bonds give 6 σ bonds and the six C-H bonds give 6 more, so benzene has 12 σ bonds, not 6.

Four carbon neighbours is quaternary, not tertiary

In 2,2-dimethylbutane, CH3C(CH3)2CH2CH3\text{CH}_3\text{C(CH}_3\text{)}_2\text{CH}_2\text{CH}_3, C2 is bonded to four carbons, so it is quaternary. The molecule has no tertiary carbon at all.

The senior group gets the lowest number, not the prefixes

Number the chain to give the suffix group the lowest number first. Only then look at the prefixes, even if another numbering would give the prefixes a lower set.

Prefixes go in alphabetical order, not in order of number

Bromo, chloro and methyl are written in that order: 1-bromo-5-chloro-4-methylhexan-3-ol, never 1-bromo-4-methyl-5-chlorohexan-3-ol.

Halogens and nitro never take a suffix

A chloro or nitro group is always a prefix, so a chain carrying Cl and OH is named as an alcohol (-ol), never as a chloride.

The lowest set comes first, the alphabet second

Compare the whole set of locants first. The alphabet decides which group is C1 only when two numberings give exactly the same set.

In phenol and aniline the base group is C1

The carbon carrying -OH in a phenol, or -NH2\text{-NH}_2 in an aniline, is always C1, even if starting elsewhere would give a lower set.

Metamers share one functional group

Propanal and propanone have different functional groups (aldehyde and ketone), so they are functional group isomers, not metamers.

One ether cannot be a metamer

C3H8O\text{C}_3\text{H}_8\text{O} has only one ether, methoxyethane, because three carbons can be split round O only as one and two. So C3H8O\text{C}_3\text{H}_8\text{O} shows no metamerism.

Electronic Effects

Learn this subtopic in the notes

What makes a carbocation stable

Hyperconjugation count

number of hyperconjugating H=number of α-hydrogens\text{number of hyperconjugating H} = \text{number of } \alpha\text{-hydrogens}

Bond fission, reactive intermediates and reagents

SpeciesChargeWhat it isExample
CarbocationPositiveCarbon with six outer electrons, sp², flat, with an empty p orbital(CH3)3C+\text{(CH}_3\text{)}_3\text{C}^+
NEET 2024 asked which of four carbocations, drawn as structures, is the most stable.
CarbanionNegativeCarbon with eight outer electrons, one pair of them a lone pair, sp³CH3−\text{CH}_3^-
Free radicalNeutralCarbon with one unpaired electron, made by homolysisCH3∙\text{CH}_3^{\bullet} (methyl radical)
NucleophileNegative or neutralGives an electron pair to an electron-poor atomHO−\text{HO}^-, CN−\text{CN}^-, H2O\text{H}_2\text{O}, NH3\text{NH}_3
ElectrophilePositive or neutralTakes an electron pair from an electron-rich atomCarbocations, and the carbon of a C=O group
A neutral molecule with a lone pair is a nucleophile; a neutral molecule with an electron-poor carbon is an electrophile.

The four electronic effects

EffectElectrons move throughHow long it lastsExample
Inductiveσ bonds, weaker with each bond along the chainPermanentCl pulls electrons along the chain of CH3CH2Cl\text{CH}_3\text{CH}_2\text{Cl}
Resonanceπ electrons and lone pairs of a conjugated systemPermanentThe -OH lone pair spreads into the ring of phenol
ElectromericOne π bond, whose pair moves fully to one atomOnly while the reagent is attackingH+\text{H}^+ adding to a C=C bond
HyperconjugationC-H σ bonds next to a π bond or an empty p orbitalPermanentA methyl group on a carbocation or on a C=C
Re-NEET 2024: hyperconjugation is how a methyl group on the positive carbon steadies a carbocation.

Common traps

A carbocation has six electrons, not eight

The positive carbon has only three bonds and an empty p orbital, so it is sp² and flat. The sp³ carbon with eight electrons is the carbanion.

Electrophiles can be neutral

An electrophile only needs an electron-poor atom. The carbon of a C=O group is one, even though the molecule carries no charge.

The methyl cation is the least stable

CH3+\text{CH}_3^+ has no alkyl group to help it, so it comes last: 3° > 2° > 1° > methyl.

Only the electromeric effect is temporary

The inductive effect, resonance and hyperconjugation are always present. The electromeric effect exists only while a reagent attacks a multiple bond.

A halogen is -I but +R

A halogen pulls σ electrons because it is electronegative (-I), yet its lone pairs can spread into a π system (+R). The two effects act in opposite directions.

Canonical structures are not real molecules

No single resonance structure exists. The molecule is always the hybrid, and it is more stable than any one structure drawn for it.

Methyl is +I, never -I

An alkyl group pushes electrons. A methyl group on a carbocation helps it by its +I effect and by hyperconjugation, not by pulling electrons away.

Count the H atoms on the next carbon, not on the positive one

A hydrogen on the positive carbon itself cannot hyperconjugate. Only hydrogens on carbons joined to it count.

Only filled orbitals give electrons

The empty p orbital is steadied by filled σ and filled π orbitals. Empty orbitals such as σ∗\sigma^* and π∗\pi^* have no electrons to give it.

Next to a ring or a C=C, count resonance too

A carbocation joined to a benzene ring or a C=C bond is also steadied by resonance, so do not judge it by its α-hydrogens alone.

Purification and Analysis

Learn this subtopic in the notes

Estimating the elements

Percentage of an element

% C=1244×mCO2m×100% H=218×mH2Om×100% N=2822400×V0m×100\%\,\text{C} = \frac{12}{44} \times \frac{m_{\text{CO}_2}}{m} \times 100 \qquad \%\,\text{H} = \frac{2}{18} \times \frac{m_{\text{H}_2\text{O}}}{m} \times 100 \qquad \%\,\text{N} = \frac{28}{22400} \times \frac{V_0}{m} \times 100
  • mmmass of the organic compound taken, in g
  • V0V_0volume of nitrogen gas at STP, in mL (Dumas method)

Sublimation, crystallisation, extraction and chromatography

MethodBased onUsed for
SublimationA solid going straight to vapour on heatingA solid that sublimes, freed from one that does not
NEET 2024 described the principle (solid to vapour without becoming liquid) and asked for the name of the method.
CrystallisationDifferent solubilities of compound and impurity in a solventPurifying a solid
Differential extractionThe compound dissolving better in an organic solvent than in waterTaking a compound out of an aqueous solution
Column and thin layer chromatographyDifferent adsorption on alumina or silica gelSeparating the parts of a mixture
Paper chromatographyDifferent partition between the water in the paper and the solventSeparating small amounts, such as dyes or amino acids

Choosing a distillation method

MethodWhen to use itExample
Simple distillationBoiling points far apartChloroform (334 K) from aniline (457 K)
Fractional distillationBoiling points close togetherThe fractions of crude oil in the petroleum industry
NEET 2026: the o- and p-nitrotoluene made by nitrating toluene were separated by fractional distillation.
Distillation under reduced pressureThe liquid decomposes at or below its boiling pointGlycerol from spent-lye in the soap industry
Steam distillationSteam volatile and does not mix with waterAniline from a mixture of aniline and water
Re-NEET 2024: a compound boiling at 250 °C, steam distilled, comes over close to but below 100 °C.
NEET 2025 matched all four of these examples to their methods in one question.

Lassaigne's test

ElementPresent in the extract asTestPositive result
NitrogenNaCNBoil with FeSO4\text{FeSO}_4, then acidify with concentrated H2SO4\text{H}_2\text{SO}_4Prussian blue, Fe4[Fe(CN)6]3⋅xH2O\text{Fe}_4[\text{Fe(CN)}_6]_3 \cdot x\text{H}_2\text{O}
SulphurNa2S\text{Na}_2\text{S}Acidify with acetic acid, add lead acetateBlack precipitate of PbS
SulphurNa2S\text{Na}_2\text{S}Sodium nitroprussideViolet colour, [Fe(CN)5NOS]4−[\text{Fe(CN)}_5\text{NOS}]^{4-}
Nitrogen and sulphur togetherNaSCNFe3+\text{Fe}^{3+}Blood red colour, [Fe(SCN)]2+[\text{Fe(SCN)}]^{2+}
NEET 2023: the blood red colour is due to [Fe(SCN)]2+[\text{Fe(SCN)}]^{2+}.
HalogensNaXBoil with HNO3\text{HNO}_3, then add AgNO3\text{AgNO}_3White (Cl, soluble in ammonia), pale yellow (Br, sparingly soluble), yellow (I, insoluble)
PhosphorusPhosphate, after heating with Na2O2\text{Na}_2\text{O}_2Boil with HNO3\text{HNO}_3, add ammonium molybdateYellow ammonium phosphomolybdate
NEET 2026 asked what fusion does: the elements change from the covalent form to the ionic form.

Common traps

Sublimation skips the liquid state

In sublimation the solid becomes vapour directly. Distillation boils a liquid; crystallisation uses a solvent. Only sublimation fits a solid that never melts on the way.

An RfR_f value cannot be more than 1

A spot cannot travel further than the solvent that carries it, so RfR_f always lies between 0 and 1. Divide the spot's distance by the solvent's, never the other way.

Paper chromatography is partition, not adsorption

In paper chromatography the parts of the mixture share themselves between the water in the paper and the moving solvent. Column chromatography and TLC are adsorption methods.

Steam distillation boils below 100 °C

The mixture does not boil between the two boiling points. It boils when the two vapour pressures add up to the atmospheric pressure, which happens close to but below 100 °C.

Close boiling points need a fractionating column

Simple distillation works only when the boiling points are far apart. When they are close, the vapour must be condensed and boiled again many times in a fractionating column.

Reduced pressure is for liquids that would break down

Glycerol decomposes before it boils at normal pressure, so it is distilled under reduced pressure, not by steam distillation.

Fusion makes ions out of covalent atoms

Lassaigne's test works because sodium fusion changes the elements from the covalent form to the ionic form. Without fusion, the covalently bonded halogen gives no precipitate with AgNO3\text{AgNO}_3.

Nitrogen with sulphur gives blood red, not Prussian blue

When both are present, the extract can hold NaSCN instead of NaCN. With Fe3+\text{Fe}^{3+} it turns blood red, and no Prussian blue forms because there are no free cyanide ions.

Use nitric acid, not hydrochloric acid

Before the halogen test the extract is boiled with HNO3\text{HNO}_3. Hydrochloric acid would add chloride ions and give white AgCl whatever the compound held.

The copper oxide test is not Lassaigne's test

Heating with CuO detects carbon and hydrogen. Lassaigne's test is sodium fusion, and it detects nitrogen, sulphur, halogens and phosphorus.

Hydrogen is 2/18 of water, not 1/18

Each water molecule holds two hydrogen atoms, so hydrogen is 2/18 of its mass. Using 1/18 halves the percentage of hydrogen.

Kjeldahl fails for nitro, azo and ring nitrogen

Nitrobenzene, azobenzene and pyridine do not give all their nitrogen as ammonium sulphate. Aniline, with an -NH2\text{-NH}_2 group, can be analysed by Kjeldahl's method.

Nitrogen gas is 28 g per 22400 mL

In Dumas' method the gas is N2\text{N}_2, so 22400 mL at STP weighs 28 g. Using 14 g halves the answer.

Oxygen is never weighed

No step of the analysis collects oxygen. Its percentage is what is left when all the other percentages are taken from 100.

More NEET Chemistry formula sheets