PYQ Vault

NEET Chemistry · Formula sheet

Solutions formulas

5 formulas, 2 reference tables and 18 common traps for NEET Chemistry Solutions, grouped by subtopic.

Full notes with worked examples

Concentration and Solubility

Learn this subtopic in the notes

Concentration terms

Mole fraction, molarity and molality

xB=nBnA+nB,M=n2Vsolution (L),m=n2Wsolvent (kg)x_B = \frac{n_B}{n_A + n_B}, \qquad M = \frac{n_2}{V_{\text{solution}}\,(\text{L})}, \qquad m = \frac{n_2}{W_{\text{solvent}}\,(\text{kg})}
  • n2n_2moles of solute, its mass divided by its molar mass
  • VsolutionV_{\text{solution}}volume of the whole solution, in litres
  • WsolventW_{\text{solvent}}mass of the solvent alone, in kilograms

Solubility and Henry's law

Henry's law

p=KH xp = K_H\,x
  • pppartial pressure of the gas above the solution
  • xxmole fraction of the gas in the solution
  • KHK_HHenry's law constant, different for each gas and rising with temperature

Types of solutions

Type of solutionSolute in solventExample
GaseousGas in gasMixture of oxygen and nitrogen
GaseousLiquid in gasChloroform mixed with nitrogen gas
NEET 2025 counted humidity as a solution of liquid in gas.
GaseousSolid in gasCamphor in nitrogen gas
NEET 2025 counted smoke as a solution of solid in gas.
LiquidGas in liquidOxygen dissolved in water
LiquidLiquid in liquidEthanol dissolved in water
LiquidSolid in liquidGlucose dissolved in water
SolidGas in solidHydrogen in palladium
SolidLiquid in solidAmalgam of mercury with sodium
SolidSolid in solidCopper dissolved in gold (an alloy)
The solvent's state gives the first column; the solute's state comes first in the second.

Common traps

The solvent decides the state

Camphor is a solid, but camphor in nitrogen gas is a gaseous solution, because nitrogen is the solvent. Read the solvent first, then the solute.

An amalgam is liquid in solid

In an amalgam of mercury with sodium, liquid mercury is the solute and solid sodium is the solvent. It is a liquid in solid solution, not solid in liquid.

Molality divides by the solvent, not the solution

Molality uses the mass of the solvent alone, in kilograms. Adding the solute's mass to it, or using grams, gives a wrong value.

Molarity needs litres of solution

Molarity divides by the volume of the whole solution in litres. For 250 mL, divide by 0.25 L, not by 250.

The mole fraction of B has B on top

xB=nBnA+nBx_B = \dfrac{n_B}{n_A + n_B}. Putting nAn_A on top gives the mole fraction of A instead.

A larger KH means a less soluble gas

From x=pKHx = \dfrac{p}{K_H}, a gas with a larger KHK_H dissolves less at the same pressure. Ranking solubility in the same order as KHK_H gets it backwards.

Gases dissolve less when it is warmer

KHK_H rises with temperature, so a gas becomes less soluble as water warms. Lower pressure also lowers gas solubility; it never raises it.

Raoult's Law and Deviations

Learn this subtopic in the notes

Vapour pressure and Raoult's law

Raoult's law

p1=x1p1∘,P=x1p1∘+x2p2∘,y1=p1Pp_1 = x_1 p_1^\circ, \qquad P = x_1 p_1^\circ + x_2 p_2^\circ, \qquad y_1 = \frac{p_1}{P}
  • p1∘p_1^\circvapour pressure of pure component 1 at that temperature
  • x1x_1mole fraction of component 1 in the liquid
  • y1y_1mole fraction of component 1 in the vapour

Ideal and non-ideal solutions

MixtureBehaviourWhy, or what follows
n-Hexane and n-heptaneIdealSimilar molecules with nearly equal attractions
Bromoethane and chloroethaneIdealSimilar molecules with nearly equal attractions
Benzene and tolueneIdealSimilar molecules with nearly equal attractions
Ethanol and acetonePositive deviationAcetone molecules get between ethanol molecules and break some of their hydrogen bonds
Carbon disulphide and acetonePositive deviationThe attractions between the two liquids are weaker than those within each
Ethanol and waterPositive deviationMinimum boiling azeotrope at about 95% ethanol by volume
Chloroform and acetoneNegative deviationChloroform forms a hydrogen bond with acetone
NEET 2026: the negative deviation is due to hydrogen bonding between chloroform and acetone.
Phenol and anilineNegative deviationThe hydrogen bond between phenol's O-H and aniline's nitrogen is stronger than those within each liquid
Re-NEET 2026: aniline and phenol show negative deviation, not positive.
Nitric acid and waterNegative deviationMaximum boiling azeotrope at about 68% nitric acid by mass
A new, stronger attraction between the two liquids lowers the vapour pressure; broken attractions raise it.

Common traps

Turn a mole ratio into mole fractions first

A ratio of 3 : 2 gives mole fractions 35\dfrac{3}{5} and 25\dfrac{2}{5}, not 3 and 2 or 32\dfrac{3}{2}. Each fraction multiplies its own liquid's pure vapour pressure.

Divide by the total to get the vapour mole fraction

x1p1∘x_1 p_1^\circ is a partial pressure. The mole fraction in the vapour is that partial pressure divided by the total vapour pressure.

Ideal does not mean no attractions

In an ideal solution the molecules still attract each other. The A-B attractions are nearly equal to the A-A and B-B ones, which is why ΔmixH\Delta_{\text{mix}}H and ΔmixV\Delta_{\text{mix}}V are zero.

Positive deviation gives the minimum boiling azeotrope

A positive deviation raises the vapour pressure, so the mixture boils lower: ethanol and water form a minimum boiling azeotrope. A negative deviation gives a maximum boiling azeotrope, as nitric acid and water do.

Phenol and aniline deviate negatively

Phenol and aniline form a hydrogen bond with each other that is stronger than the hydrogen bonds in either pure liquid, so their deviation is negative, like chloroform and acetone.

Colligative Properties

Learn this subtopic in the notes

Boiling point, freezing point and the van 't Hoff factor

p1∘−p1p1∘=x2,ΔTb=iKbm,ΔTf=iKfm,i=1+(n−1)α\frac{p_1^\circ - p_1}{p_1^\circ} = x_2, \qquad \Delta T_b = iK_b m, \qquad \Delta T_f = iK_f m, \qquad i = 1 + (n - 1)\alpha
  • mmmolality, moles of solute per kg of solvent
  • Kb,KfK_b, K_febullioscopic and cryoscopic constants of the solvent
  • iivan 't Hoff factor, the number of particles each formula unit gives in solution
  • α\alphadegree of dissociation or association

Osmotic pressure and isotonic solutions

Osmotic pressure

π=iCRT=i n2RTV,M2=w2RTπV\pi = iCRT = \frac{i\,n_2RT}{V}, \qquad M_2 = \frac{w_2RT}{\pi V}
  • CCmolar concentration of the solute, in mol per litre
  • RRgas constant, 0.083 L bar per mol per K
  • TTtemperature in kelvin

Common traps

Count the ions, not the formula units

0.01 M Na2SO4\text{Na}_2\text{SO}_4 gives 3 ions per formula unit, so it acts like 0.03 M of particles. A non-electrolyte at a higher concentration can still give fewer particles.

Association makes i less than 1

When solute molecules pair up, as ethanoic acid does in benzene, there are fewer particles than formula units. Then i is below 1 and the measured molar mass comes out larger than the true one.

The freezing point falls, the boiling point rises

Subtract ΔTf\Delta T_f from the solvent's freezing point and add ΔTb\Delta T_b to its boiling point. The solution with the largest i×mi \times m has the lowest freezing point.

Use the temperature in kelvin

In π=CRT\pi = CRT, T is in kelvin: 37 °C is 310 K. A temperature found from the formula comes out in kelvin, so subtract 273 to give it in °C.

Equal masses do not give equal osmotic pressure

10 g of urea (60 g/mol) holds more moles than 10 g of glucose (180 g/mol), so in the same volume urea gives the higher osmotic pressure. Convert mass to moles first.

Isotonic means equal particle concentration

Two solutions are isotonic when iCiC is the same, not when the grams per litre are the same. Different molar masses need different masses for the same molarity.

More NEET Chemistry formula sheets