PYQ Vault

NEET Chemistry · Formula sheet

Thermodynamics formulas

8 formulas, 1 reference table and 27 common traps for NEET Chemistry Thermodynamics, grouped by subtopic.

Full notes with worked examples

The First Law and Work

Learn this subtopic in the notes

The first law with chemistry's signs

First law

ΔU=q+w\Delta U = q + w
  • qqheat absorbed by the system
  • wwwork done on the system

Work of expansion

w=−pexΔV,wrev=−2.303 nRTlog⁡VfVi=−2.303 nRTlog⁡pipfw = -p_{ex}\Delta V, \qquad w_{rev} = -2.303\,nRT\log\frac{V_f}{V_i} = -2.303\,nRT\log\frac{p_i}{p_f}
  • pexp_{ex}external pressure the gas pushes against
  • Vi,VfV_i, V_finitial and final volumes
  • pi,pfp_i, p_finitial and final pressures

Systems, processes and state functions

ProcessWhat is fixedWhat follows
IsothermalTemperature, ΔT=0\Delta T = 0For an ideal gas ΔU=0\Delta U = 0
IsochoricVolume, ΔV=0\Delta V = 0No expansion work, w=0w = 0
IsobaricPressure, Δp=0\Delta p = 0Heat taken in equals ΔH\Delta H
AdiabaticNo heat crosses the boundary, q=0q = 0ΔU=wad\Delta U = w_{ad}
CyclicThe system returns to its starting stateΔU=0\Delta U = 0, since U is a state function

Common traps

A ratio of two extensive properties is intensive

Mass and volume both depend on the amount, but density (mass per volume) does not. In the same way molarity and specific heat are intensive.

Adiabatic does not mean isothermal

In an adiabatic process no heat crosses the boundary, but the temperature can still change: a gas that expands adiabatically cools, because the work it does comes out of its internal energy.

Work done by the system is negative

In ΔU=q+w\Delta U = q + w the work is the work done on the system. When a gas expands and does 200 J of work, w=−200w = -200 J. Physics books write the same law as ΔU=Q−W\Delta U = Q - W with W done by the gas; do not mix the two conventions in one sum.

Heat given out is negative

Heat the system releases to the surroundings enters the first law with a minus sign. Only heat absorbed by the system is positive.

Free expansion does no work and takes no heat

A gas expanding into a vacuum pushes against zero pressure, so w=0w = 0. For an ideal gas at constant temperature ΔU=0\Delta U = 0 as well, so q=0q = 0.

Use the external pressure

In w=−pexΔVw = -p_{ex}\Delta V the pressure is the one the gas pushes against, not the gas's own starting pressure. Against a vacuum it is zero, whatever the gas pressure was.

The pressure ratio is upside down

For an isothermal ideal gas VfVi=pipf\dfrac{V_f}{V_i} = \dfrac{p_i}{p_f}. Writing log⁡pfpi\log\dfrac{p_f}{p_i} for an expansion flips the sign of the work.

Litre atmospheres are not joules

pΔVp\Delta V in atm and litres gives L atm. Multiply by 101.3 to get joules before comparing with answers in J.

Enthalpy and Thermochemistry

Learn this subtopic in the notes

Enthalpy, and ΔH against ΔU

Enthalpy and internal energy

ΔH=ΔU+ΔngRT,Cp−Cv=R\Delta H = \Delta U + \Delta n_g RT, \qquad C_p - C_v = R
  • Δng\Delta n_gmoles of gaseous products minus moles of gaseous reactants
  • Cp,CvC_p, C_vmolar heat capacities at constant pressure and constant volume

Reaction enthalpy and standard enthalpy of formation

Reaction enthalpy from formation enthalpies

ΔrH⊖=∑ai ΔfHproducts⊖−∑bi ΔfHreactants⊖\Delta_r H^\ominus = \sum a_i\,\Delta_f H^\ominus_{\text{products}} - \sum b_i\,\Delta_f H^\ominus_{\text{reactants}}
  • ai,bia_i, b_icoefficients of products and reactants in the balanced equation
  • ΔfH⊖\Delta_f H^\ominusstandard enthalpy of formation, per mole

Hess's law and enthalpies of different types

Hess's law and bond enthalpy

ΔrH=ΔrH1+ΔrH2+ΔrH3+…,ΔrH⊖=∑B.E.reactants−∑B.E.products\Delta_r H = \Delta_r H_1 + \Delta_r H_2 + \Delta_r H_3 + \dots, \qquad \Delta_r H^\ominus = \sum \text{B.E.}_{\text{reactants}} - \sum \text{B.E.}_{\text{products}}

Common traps

Count only the gases

In Δng\Delta n_g solids and liquids are left out. When methane burns to carbon dioxide and liquid water, the water does not count: Δng=1−3=−2\Delta n_g = 1 - 3 = -2.

Products minus reactants

Δng\Delta n_g is gaseous products minus gaseous reactants. For N2+3H2→2NH3\text{N}_2 + 3\text{H}_2 \rightarrow 2\text{NH}_3 it is 2−4=−22 - 4 = -2, so ΔU=ΔH+2RT\Delta U = \Delta H + 2RT.

Match the units before adding

ΔH\Delta H is usually given in kJ but RTRT with R = 8.314 comes out in J: at 300 K, RT=2494RT = 2494 J =2.494= 2.494 kJ. Convert one of them before you add.

Bromine's reference state is a liquid

ΔfH⊖\Delta_f H^\ominus is zero for Br2(l)\text{Br}_2\text{(l)}, not for Br2(g)\text{Br}_2\text{(g)}. Chlorine is a gas at 298 K, so ΔfH⊖\Delta_f H^\ominus of Cl2(g)\text{Cl}_2\text{(g)} is zero.

Diamond is not carbon's reference state

Graphite is the most stable form of carbon, so ΔfH⊖\Delta_f H^\ominus is zero for graphite and not for diamond.

Multiply by the coefficients

Each ΔfH⊖\Delta_f H^\ominus is per mole. Multiply it by the coefficient in the balanced equation before adding; using one mole of each species is the commonest slip.

Reversing an equation flips the sign

When an equation is turned round to fit the target, its ΔH\Delta H changes sign. Forgetting this on one equation of three is the usual Hess's law error.

Bond enthalpies go reactants minus products

With bond enthalpies, ΔrH\Delta_r H is bonds broken minus bonds formed, that is reactants minus products. With formation enthalpies it is the other way: products minus reactants.

Bond enthalpies need gases

The bond enthalpy rule holds only when every species is a gas. A liquid or solid also needs the enthalpy to turn it into gas, which bond enthalpies leave out.

Combustion is per mole of fuel

ΔcH⊖\Delta_c H^\ominus is quoted per mole of the substance burnt. If an equation burns 2 moles, its ΔH\Delta H is twice the combustion enthalpy.

Entropy and Gibbs Energy

Learn this subtopic in the notes

Entropy and the second law

Entropy change

ΔS=qrevT,ΔStotal=ΔSsys+ΔSsurr>0 (spontaneous)\Delta S = \frac{q_{rev}}{T}, \qquad \Delta S_{total} = \Delta S_{sys} + \Delta S_{surr} > 0 \ \text{(spontaneous)}
  • qrevq_{rev}heat absorbed by the system along a reversible path
  • TTtemperature in kelvin

Gibbs energy and spontaneity

Gibbs energy

ΔG=ΔH−TΔS,Tchange=ΔHΔS\Delta G = \Delta H - T\Delta S, \qquad T_{\text{change}} = \frac{\Delta H}{\Delta S}
  • ΔG\Delta GGibbs energy change; negative for a spontaneous change
  • TTtemperature in kelvin

Gibbs energy and the equilibrium constant

Gibbs energy and K

ΔrG⊖=−RTln⁡K=−2.303 RTlog⁡K\Delta_r G^\ominus = -RT\ln K = -2.303\,RT\log K
  • KKequilibrium constant of the reaction
  • ΔrG⊖\Delta_r G^\ominusstandard Gibbs energy change of the reaction

Common traps

Temperature in kelvin

In ΔS=qrevT\Delta S = \dfrac{q_{rev}}{T} the temperature must be in kelvin. Dividing by 100 for water boiling at 100 °C gives a value almost four times too big.

No heat does not mean no entropy change

In a free expansion q=0q = 0, yet the gas's entropy rises: S is a state function, so ΔSsys\Delta S_{sys} is that of a reversible isothermal expansion between the same volumes. Only the surroundings, which exchange no heat, have ΔSsurr=0\Delta S_{surr} = 0.

It is the total entropy that must rise

Water freezing below 0 °C lowers the system's entropy and is still spontaneous, because the heat it releases raises the surroundings' entropy by more. Judge spontaneity by ΔStotal\Delta S_{total}, not by ΔSsys\Delta S_{sys} alone.

Put ΔS in kJ before you subtract

ΔS\Delta S is usually given in J/K and ΔH\Delta H in kJ. Divide TΔST\Delta S by 1000 first, or the entropy term comes out a thousand times too big.

A negative ΔH is not enough

Spontaneity is decided by ΔG\Delta G, not by ΔH\Delta H alone. An exothermic reaction with falling entropy stops being spontaneous at high temperature, and an endothermic one with rising entropy becomes spontaneous there.

Change ΔU into ΔH first

ΔG=ΔH−TΔS\Delta G = \Delta H - T\Delta S uses ΔH\Delta H. When a question gives ΔU\Delta U for a gas reaction, add ΔngRT\Delta n_g RT before using it.

2.303 goes with log, not ln

−RTln⁡K-RT\ln K and −2.303 RTlog⁡K-2.303\,RT\log K are the same quantity. Use 2.303 only when you take the logarithm to base 10.

ΔG° is not ΔG

At equilibrium ΔrG=0\Delta_r G = 0 for every reaction. ΔrG⊖\Delta_r G^\ominus is zero only in the special case K=1K = 1.

Products over reactants

Build K with the products' concentrations on top. Turning it upside down changes the sign of log⁡K\log K and so the sign of ΔrG⊖\Delta_r G^\ominus.

More NEET Chemistry formula sheets