PYQ Vault

NEET Chemistry · Formula sheet

Electrochemistry formulas

8 formulas, 2 reference tables and 24 common traps for NEET Chemistry Electrochemistry, grouped by subtopic.

Full notes with worked examples

Galvanic Cells and Electrode Potentials

Learn this subtopic in the notes

Galvanic cells and E°cell

Standard cell potential

Ecell∘=Ecathode∘−Eanode∘E^\circ_{cell} = E^\circ_{cathode} - E^\circ_{anode}
  • Ecathode∘E^\circ_{cathode}reduction potential of the couple that is reduced (right electrode)
  • Eanode∘E^\circ_{anode}reduction potential of the couple that is oxidised (left electrode)

The Nernst equation

Nernst equation at 298 K

Ecell=Ecell∘−0.059nlog⁡QE_{cell} = E^\circ_{cell} - \frac{0.059}{n}\log Q
  • QQproducts over reactants, powers from the balanced equation
  • nnelectrons transferred in the balanced reaction

Gibbs energy, equilibrium constant and E°cell

Gibbs energy and equilibrium constant

ΔrG∘=−nFEcell∘,log⁡K=nEcell∘0.059 (298 K)\Delta_r G^\circ = -nFE^\circ_{cell}, \qquad \log K = \frac{nE^\circ_{cell}}{0.059}\ \text{(298 K)}
  • nnelectrons transferred in the balanced reaction
  • FFthe Faraday, the charge on one mole of electrons
  • KKequilibrium constant of the cell reaction

Standard electrode potentials and the electrochemical series

CoupleE° at 298 K (V)What it tells you
Li+/Li\text{Li}^{+}/\text{Li}−3.05-3.05Li is the strongest reducing agent in the table
K+/K\text{K}^{+}/\text{K}−2.93-2.93A very strong reducing agent
Al3+/Al\text{Al}^{3+}/\text{Al}−1.66-1.66Al is a strong reducing agent
Zn2+/Zn\text{Zn}^{2+}/\text{Zn}−0.76-0.76Zn is the anode of the Daniell cell
Fe2+/Fe\text{Fe}^{2+}/\text{Fe}−0.44-0.44Fe gives H₂ with dilute acid
Ni2+/Ni\text{Ni}^{2+}/\text{Ni}−0.25-0.25Ni lies just below hydrogen
H+/H2\text{H}^{+}/\text{H}_20.000.00The zero of the scale, by definition
Cu2+/Cu\text{Cu}^{2+}/\text{Cu}+0.34+0.34Cu gives no H₂ with dilute acid
I2/I−\text{I}_2/\text{I}^{-}+0.54+0.54I⁻ is a fairly good reducing agent
Fe3+/Fe2+\text{Fe}^{3+}/\text{Fe}^{2+}+0.77+0.77Fe³⁺ can oxidise I⁻ to I₂
Ag+/Ag\text{Ag}^{+}/\text{Ag}+0.80+0.80Ag cannot reduce Cu²⁺
NEET 2022: Ag cannot displace Cu from CuSO₄, because Ag⁺/Ag (0.80 V) lies above Cu²⁺/Cu (0.34 V).
Br2/Br−\text{Br}_2/\text{Br}^{-}+1.09+1.09Br₂ oxidises I⁻ but not Cl⁻
Cl2/Cl−\text{Cl}_2/\text{Cl}^{-}+1.36+1.36Cl₂ oxidises Br⁻ and I⁻
MnO4−/Mn2+\text{MnO}_4^{-}/\text{Mn}^{2+}+1.51+1.51Acidified permanganate is a strong oxidising agent
F2/F−\text{F}_2/\text{F}^{-}+2.87+2.87F₂ is the strongest oxidising agent
Read down the table for stronger oxidising agents (the left-hand species); read up for stronger reducing agents (the right-hand species).

Common traps

Every tabulated value is a reduction potential

The table lists reduction potentials only. To judge a reaction, find which couple is reduced in it and which is oxidised, then check that the reduced couple has the higher E°.

More negative means a stronger reducing agent

Lithium, at −3.05-3.05 V, is the strongest reducing agent of all. A more negative E° means the metal gives up electrons more easily, not less.

Subtract, do not add

Ecell∘E^\circ_{cell} is the cathode's reduction potential minus the anode's. Adding the two tabulated values gives a wrong answer whenever the anode's E° is not zero.

Watch which way a potential is written

A question may give an oxidation potential, such as E∘E^\circ of Mn2+/MnO4−\text{Mn}^{2+}/\text{MnO}_4^{-} as −1.51-1.51 V. Turn it into the reduction potential (+1.51+1.51 V) by changing its sign before you subtract.

Doubling a half reaction leaves E° alone

Balancing the electrons may double a half reaction. Its E° stays the same, because E° does not depend on how much substance reacts.

Keep the powers in Q

In Ni+2Ag+\text{Ni} + 2\text{Ag}^{+}, the silver ion is squared in Q. Balance the equation first; the same balancing gives both n and the powers.

Oxidation or reduction potential

A half cell written Pt∣H2∣H+\text{Pt}|\text{H}_2|\text{H}^{+} is an oxidation, H2→2H++2e−\text{H}_2 \rightarrow 2\text{H}^{+} + 2e^-, and Q is [H+]2pH2\dfrac{[\text{H}^{+}]^2}{p_{\text{H}_2}}. The reduction potential of the same electrode has the same size and the opposite sign.

Q upside down

Q is products over reactants. Writing it the other way round flips the sign of the log term.

Joules, not kilojoules

nFE∘nFE^\circ comes out in joules per mole. Divide by 1000 before comparing with options in kJ mol⁻¹.

Potentials do not subtract directly

E∘(Fe3+/Fe)−E∘(Fe2+/Fe)E^\circ(\text{Fe}^{3+}/\text{Fe}) - E^\circ(\text{Fe}^{2+}/\text{Fe}) is not E∘(Fe3+/Fe2+)E^\circ(\text{Fe}^{3+}/\text{Fe}^{2+}). Multiply each potential by its own number of electrons first, because only Gibbs energies add.

Conductance of Electrolytic Solutions

Learn this subtopic in the notes

Conductivity, cell constant and molar conductivity

Conductivity and molar conductivity

κ=G∗R,Λm=1000 κc\kappa = \frac{G^*}{R}, \qquad \Lambda_m = \frac{1000\,\kappa}{c}
  • κ\kappaconductivity, in S cm⁻¹
  • G∗G^*cell constant l/A, in cm⁻¹
  • ccconcentration, in mol L⁻¹

Molar conductivity on dilution and Kohlrausch's law

Dilution and Kohlrausch's law

Λm=Λm∘−Ac,Λm∘=ν+λ+∘+ν−λ−∘\Lambda_m = \Lambda_m^\circ - A\sqrt{c}, \qquad \Lambda_m^\circ = \nu_{+}\lambda^\circ_{+} + \nu_{-}\lambda^\circ_{-}
  • Λm∘\Lambda_m^\circlimiting molar conductivity, at infinite dilution
  • λ+∘,λ−∘\lambda^\circ_{+}, \lambda^\circ_{-}limiting molar conductivities of the cation and the anion
  • ν+,ν−\nu_{+}, \nu_{-}number of cations and anions in one formula unit

Degree of dissociation from molar conductivity

Degree of dissociation and Ka

α=ΛmΛm∘,Ka=cα21−α\alpha = \frac{\Lambda_m}{\Lambda_m^\circ}, \qquad K_a = \frac{c\alpha^2}{1 - \alpha}
  • α\alphafraction of the electrolyte split into ions
  • ccconcentration of the weak acid, in mol L⁻¹

Common traps

The cell constant is κ times R

G∗=RκG^* = R\kappa, not κ/R\kappa/R. A larger resistance for the same solution means a larger cell constant.

Remember the 1000

With κ\kappa in S cm⁻¹ and c in mol L⁻¹, Λm=1000 κc\Lambda_m = \dfrac{1000\,\kappa}{c}. Leaving out the 1000 makes the answer a thousand times too small.

Two quantities move opposite ways on dilution

Diluting a solution lowers its conductivity but raises its molar conductivity. A statement that both fall, or both rise, is false.

Count every ion in the formula

For CaCl₂ the chloride term is counted twice: Λm∘=λ∘(Ca2+)+2λ∘(Cl−)\Lambda_m^\circ = \lambda^\circ(\text{Ca}^{2+}) + 2\lambda^\circ(\text{Cl}^{-}).

Extending the plot works only for strong electrolytes

A strong electrolyte gives a straight line against c\sqrt{c}, so its intercept is Λm∘\Lambda_m^\circ. A weak electrolyte does not; its Λm∘\Lambda_m^\circ comes from Kohlrausch's law.

Divide by the limiting value

α=Λm/Λm∘\alpha = \Lambda_m/\Lambda_m^\circ, the measured value over the value at infinite dilution. Turned the other way it comes out greater than 1, which no fraction can be.

Square α in Ka

Ka=cα2K_a = c\alpha^2 for small α. Using cαc\alpha gives an answer too large by a factor of 1/α1/\alpha.

Electrolysis, Batteries and Corrosion

Learn this subtopic in the notes

Faraday's laws of electrolysis

Mass deposited in electrolysis

Q=It,m=M I tnFQ = It, \qquad m = \frac{M\,I\,t}{nF}
  • MMmolar mass of the substance deposited
  • nnelectrons needed per ion
  • tttime, in seconds

Charge for a conversion and products of electrolysis

Charge for a conversion

Faradays=moles×∣Δ(oxidation number)∣ per formula unit\text{Faradays} = \text{moles} \times \left|\Delta(\text{oxidation number})\right| \text{ per formula unit}

Batteries, fuel cells and corrosion

Cell or processKindWhat to remember
Dry (Leclanché) cellPrimaryZinc container anode; carbon rod cathode in MnO₂ and carbon; moist NH₄Cl and ZnCl₂ paste; about 1.5 V
Mercury cellPrimaryZinc-mercury amalgam anode; HgO and carbon cathode; KOH and ZnO paste; about 1.35 V, steady over its life
Lead storage batterySecondaryLead anode, PbO₂ cathode, 38% sulphuric acid; both electrodes turn to PbSO₄ on discharge
Nickel-cadmium cellSecondaryRechargeable, with a longer life than the lead storage battery
Hydrogen-oxygen fuel cellFuel cellPorous carbon electrodes with Pt or Pd catalyst, concentrated NaOH electrolyte; used in the Apollo space programme
Rusting of ironCorrosionIron is the anode and is oxidised; rust is hydrated ferric oxide
Re-NEET 2024: making hydrogen by electrolysis of water is not corrosion; rusting, tarnishing of silver and the green coat on copper are.

Common traps

Time in seconds

Q=ItQ = It needs t in seconds. Ten minutes is 600 s; putting in 10 gives an answer 60 times too small.

Divide by the electrons per ion

Cu²⁺ takes 2 electrons per atom, so the moles of copper are half the moles of electrons. Forgetting the 2 doubles the mass.

Say per mole of what

Getting aluminium from Al₂O₃ takes 3 F per mole of Al but 6 F per mole of Al₂O₃, which holds two Al atoms. Read which substance the question counts in moles before you multiply.

Molten and aqueous give different products

Molten NaCl gives sodium at the cathode. Aqueous NaCl gives hydrogen there, because water is reduced first.

Electrolysis is not corrosion

Corrosion is a metal being slowly oxidised by its surroundings. Splitting water by electrolysis is driven by an outside current and eats no metal.

Primary cells are not rechargeable

The dry cell and the mercury cell are primary: once used up they are thrown away. The lead storage battery and the nickel-cadmium cell are the secondary, rechargeable ones.

Iron is the anode in rusting

In rusting, iron loses electrons at an anode spot: iron is oxidised, never reduced. The species reduced is oxygen, together with H⁺, at another spot of the surface that acts as the cathode.

More NEET Chemistry formula sheets