PYQ Vault

NEET Chemistry · Formula sheet

Some Basic Concepts of Chemistry formulas

7 formulas, 2 reference tables and 19 common traps for NEET Chemistry Some Basic Concepts of Chemistry, grouped by subtopic.

Full notes with worked examples

Measurement and Chemical Laws

Learn this subtopic in the notes

Significant figures and rounding off

Number or calculationRule usedResult
0.00520.0052Zeros before the first non-zero digit do not count2 significant figures
2.0052.005Zeros between non-zero digits count4 significant figures
0.2000.200Zeros at the right count after a decimal point3 significant figures
100100Zeros at the right without a decimal point do not count1 significant figure
4.62×0.31=1.43224.62 \times 0.31 = 1.4322Fewest significant figures (0.31 has 2)1.41.4
12.11+18.0+1.012=31.12212.11 + 18.0 + 1.012 = 31.122Fewest decimal places (18.0 has 1)31.131.1
1.3861.386 to two decimal placesDigit removed is 6, more than 5: raise1.391.39
4.3344.334 to two decimal placesDigit removed is 4, less than 5: leave4.334.33
6.356.35 and 6.256.25 to one decimal placeDigit removed is 5: raise an odd digit, leave an even one6.46.4 and 6.26.2Q
Re-NEET 2026: 17.0145 became 17.014 (4 is even) and 21.0235 became 21.024 (3 is odd).
A power of ten never adds or removes a significant figure.

Laws of chemical combination and Dalton's theory

LawWhat it saysExample
Conservation of massTotal mass of products equals total mass of reactants2 g of hydrogen and 16 g of oxygen give 18 g of water
Definite proportionsOne compound always has the same mass ratio of its elementsCopper carbonate from nature and from the laboratory have the same percentages of copper, carbon and oxygen
Multiple proportionsTwo compounds of the same two elements: masses of one element with a fixed mass of the other are in a simple ratio2 g of hydrogen combines with 16 g of oxygen in water and 32 g in hydrogen peroxide: 16 : 32 = 1 : 2
Gaseous volumes (Gay Lussac)Gases react in a simple ratio by volume at the same temperature and pressure100 mL of hydrogen and 50 mL of oxygen give 100 mL of water vapour: 2 : 1 : 2
Avogadro's lawEqual volumes of gases at the same temperature and pressure hold equal numbers of moleculesTwo flasks of the same size, at the same temperature and pressure, hold the same number of moles of any gas
Dalton's atomic theoryExplains the three mass laws aboveCannot explain the law of gaseous volumesQ
NEET 2025: asked which law Dalton's theory could not explain. The answer was the law of gaseous volumes.

Common traps

An exact 5 is not always rounded up

When the digit removed is exactly 5, look at the digit before it. Raise it only if it is odd: 6.35 becomes 6.4, but 6.25 becomes 6.2.

The decimal point makes trailing zeros count

100 has one significant figure, but 100.0 has four. Zeros at the right of a number count only when a decimal point is written.

Two different rules for answers

For multiplying and dividing, count significant figures. For adding and subtracting, count decimal places. 12.11 + 18.0 + 1.012 is reported as 31.1 because 18.0 has one decimal place.

Definite and multiple proportions are different laws

Definite proportions is about one compound: its mass ratio never changes. Multiple proportions compares two compounds of the same two elements, such as water and hydrogen peroxide.

Dalton's theory fails on gas volumes

Dalton's atomic theory explains the laws by mass but not Gay Lussac's law of gaseous volumes. Avogadro's idea that equal volumes of gases hold equal numbers of molecules accounts for those simple volume ratios.

Mole Concept and Formulae

Learn this subtopic in the notes

Atomic mass, the mole and molar mass

Mole relations

n=mM=NNA=V22.7 L mol−1 (gas at STP)n = \frac{m}{M} = \frac{N}{N_A} = \frac{V}{22.7\ \text{L mol}^{-1}}\ (\text{gas at STP})
  • nnnumber of moles
  • mmmass of the sample in grams
  • MMmolar mass in grams per mole
  • NNnumber of particles
  • NAN_AAvogadro's number, 6.022 × 10²³ per mole

Counting atoms in a sample

Number of atoms

Atoms=mM×NA×(atoms per formula unit)\text{Atoms} = \frac{m}{M} \times N_A \times (\text{atoms per formula unit})

Empirical and molecular formulae

Empirical to molecular formula

n=molar massempirical formula mass,molecular formula=(empirical formula)nn = \frac{\text{molar mass}}{\text{empirical formula mass}}, \qquad \text{molecular formula} = (\text{empirical formula})_n

Common traps

u is one particle, grams is a mole

4 u of helium is the mass of a single helium atom, but 4 g of helium is one mole, 6.022×10236.022 \times 10^{23} atoms. Read the unit before you count.

22.7 L or 22.4 L

At STP (273.15 K and 1 bar) one mole of gas occupies 22.7 L. The older value, 22.4 L, is for 273 K and 1 atm. Use the volume the question gives or implies.

Molecules are not atoms

1 mol of O2\text{O}_2 holds NAN_A molecules but 2NA2N_A atoms. Options often offer both numbers, so check which one the question asks for.

Count every atom in the formula

Na2CO3\text{Na}_2\text{CO}_3 has 2 + 1 + 3 = 6 atoms, not 3. Add up all the subscripts before you multiply.

Percentages are masses, not atoms

Divide each percentage by the atomic mass before you compare. Comparing the percentages directly gives a mass ratio, not the ratio of atoms a formula needs.

Do not round 1.5 to a whole number

A mole ratio such as 1 : 1.5 is not 1 : 1 or 1 : 2. Multiply every value by 2 to get 2 : 3.

Stoichiometry

Learn this subtopic in the notes

Mole ratios from a balanced equation

Mass to mass through moles

nB=nA×ba,mB=nB×MB(aA→bB)n_B = n_A \times \frac{b}{a}, \qquad m_B = n_B \times M_B \quad (a\text{A} \rightarrow b\text{B})
  • a,ba, bcoefficients of A and B in the balanced equation
  • nA,nBn_A, n_Bmoles of A used and of B formed
  • MBM_Bmolar mass of B

Impure reactants and solutions

Purity and moles in solution

mpure=purity100×msample,n=M×V(L)m_{\text{pure}} = \frac{\text{purity}}{100} \times m_{\text{sample}}, \qquad n = M \times V(\text{L})

Limiting reagent

Finding the limiting reagent

limiting reagent=smallest ncoefficient\text{limiting reagent} = \text{smallest } \frac{n}{\text{coefficient}}

Volume relations in gas reactions

Gas volumes at the same temperature and pressure

V1V2=n1n2,V=n×22.7 L mol−1 (STP)\frac{V_1}{V_2} = \frac{n_1}{n_2}, \qquad V = n \times 22.7\ \text{L mol}^{-1}\ (\text{STP})

Common traps

Coefficients are moles, not grams

In CH4+2O2→CO2+2H2O\text{CH}_4 + 2\text{O}_2 \rightarrow \text{CO}_2 + 2\text{H}_2\text{O}, 16 g of methane needs 64 g of oxygen, not 32 g. Turn grams into moles before you use the coefficients.

An unbalanced equation gives a wrong ratio

Balance the equation before reading any ratio from it. Burning C4H10\text{C}_4\text{H}_{10} gives 4 mol of CO2\text{CO}_2 per mole only once the equation is balanced.

Cut the sample down to its pure part first

Only the pure substance reacts. Multiply the sample mass by the purity before you divide by the molar mass; dividing the whole sample mass gives too many moles.

Millilitres must become litres

Molarity is moles per litre, so 50 mL of 0.5 M HCl holds 0.5×0.050=0.0250.5 \times 0.050 = 0.025 mol, not 25 mol.

Fewer moles does not always mean limiting

Divide each reactant's moles by its coefficient before you compare. With 2 mol of H2\text{H}_2 and 1 mol of N2\text{N}_2, hydrogen limits even though there is more of it, because the equation needs 3 mol of H2\text{H}_2 per mole of N2\text{N}_2.

The excess left is not the excess present

Subtract what the limiting reagent used up. The amount left is what was added minus what reacted.

Solids and liquids have no gas volume

In C+CO2→2CO\text{C} + \text{CO}_2 \rightarrow 2\text{CO}, the carbon is a solid, so 1 volume of gas becomes 2 volumes. Liquid water after cooling also adds nothing to the gas volume.

Volume ratio needs the same temperature and pressure

Coefficients are a volume ratio only when every gas is measured at the same temperature and pressure. Otherwise go through moles.

More NEET Chemistry formula sheets