PYQ Vault

NEET Physics · Formula sheet

Electric Charges and Fields formulas

7 formulas and 22 common traps for NEET Physics Electric Charges and Fields, grouped by subtopic.

Full notes with worked examples

Charge, Coulomb's Law and Electric Field

Learn this subtopic in the notes

Charge and Coulomb's law

Coulomb's law

F=14πε0 q1q2r2,q=ne,qshared=q1+q22F = \frac{1}{4\pi\varepsilon_0}\,\frac{q_1 q_2}{r^{2}}, \qquad q = ne, \qquad q_{\text{shared}} = \frac{q_1 + q_2}{2}
  • ε0\varepsilon_0permittivity of free space, 8.85 × 10⁻¹² C² N⁻¹ m⁻²
  • nna whole number of electron charges
  • rrdistance between the two point charges

Electric field, field lines and charge density

Field and charge density

E=kqr2,F⃗=qE⃗,λ=QL,σ=QAE = \frac{kq}{r^{2}}, \qquad \vec{F} = q\vec{E}, \qquad \lambda = \frac{Q}{L}, \qquad \sigma = \frac{Q}{A}
  • q0q_0a small positive test charge
  • λ\lambdacharge per unit length
  • σ\sigmacharge per unit area

Common traps

Add the charges with their signs before halving

When identical conductors touch, the shared charge is half the signed total. +6 μC and −2 μC give +2 μC each, not 4 μC each.

Work one contact at a time

When a third sphere touches two others in turn, each contact shares only the charge the two spheres hold at that moment. Track what the third sphere carries into its next contact.

The force goes as one over r squared

Doubling the distance between two charges cuts the force to a quarter, not a half. Tripling it cuts the force to a ninth.

A negative charge is pushed against the field

F⃗=qE⃗\vec{F} = q\vec{E} with q negative points opposite to E⃗\vec{E}. An electron in a field to the right is pushed to the left.

Midway between opposite charges the field is not zero

Between +q and −q both fields point towards the negative charge, so they add. The field is zero midway only between two equal charges of the same sign.

Surface density uses the surface, not the volume

Charge on a metal body sits on its outer surface. Divide the charge by the total outer area, for example 6a26a^{2} for a cube of side a, never by the volume.

Electric Dipole

Learn this subtopic in the notes

Dipole moment and the field of a dipole

Dipole moment and field

p=q(2a),Eaxial=2kpr3,Eequatorial=kpr3p = q(2a), \qquad E_{\text{axial}} = \frac{2kp}{r^{3}}, \qquad E_{\text{equatorial}} = \frac{kp}{r^{3}}
  • 2a2adistance between the two charges
  • ppdipole moment, from −q to +q
  • rrdistance from the centre of the dipole, much larger than a

Dipole in a uniform field: torque and energy

Torque and energy of a dipole

τ=pEsin⁡θ,U=−pEcos⁡θ,W=pE(cos⁡θ1−cos⁡θ2)\tau = pE\sin\theta, \qquad U = -pE\cos\theta, \qquad W = pE(\cos\theta_1 - \cos\theta_2)
  • θ\thetaangle between the dipole moment and the field
  • UUpotential energy of the dipole in the field

Dipole in a non-uniform field

Net force on a dipole along the field

Fnet=q (E+−E−)F_{\text{net}} = q\,(E_{+} - E_{-})
  • E+E_{+}field strength where the positive charge sits
  • E−E_{-}field strength where the negative charge sits

Common traps

A dipole's field falls as one over r cubed

A single charge's field goes as 1/r21/r^{2}, but a dipole's goes as 1/r31/r^{3}. Doubling the distance cuts a dipole's field to one eighth.

The dipole moment points from minus to plus

p⃗\vec{p} runs from −q to +q. Drawn the other way, every direction you find afterwards, for the field, the torque or the force, comes out reversed.

The equatorial field is parallel to the axis

On the equatorial line the field points opposite to p⃗\vec{p}, parallel to the dipole's axis. It does not point along the line from the point to the dipole's centre.

No net force, but a torque

A uniform field turns a dipole without moving it as a whole. The net force is zero while the torque is pEsin⁡θpE\sin\theta.

Sine for torque, cosine for energy

Torque is pEsin⁡θpE\sin\theta and energy is −pEcos⁡θ-pE\cos\theta. Mixing them up gives zero torque at 90°, where it is actually largest.

The energy is lowest when lined up, not at 90°

U=−pEcos⁡θU = -pE\cos\theta is −pE at 0°, the minimum, and zero at 90°. The work to turn a dipole is the change in U, not U at the final angle.

The length in p is the full separation, in metres

In p=q×2ap = q \times 2a the length is the whole distance between the two charges. Turn centimetres into metres before dividing to find q.

A net force needs a non-uniform field

In a uniform field a dipole only turns. A dipole moves as a whole only where the field is stronger at one end than at the other.

Find which charge is in the stronger field

The direction of p⃗\vec{p} alone does not fix the force. Find where +q sits, compare the field at its end with the field at −q's end, and the charge in the stronger field decides the direction.

Gauss's Law and Conductors

Learn this subtopic in the notes

Electric flux and Gauss's law

Flux and Gauss's law

ϕ=EAcos⁡θ,∮E⃗⋅dA⃗=qencε0\phi = EA\cos\theta, \qquad \oint \vec{E}\cdot d\vec{A} = \frac{q_{\text{enc}}}{\varepsilon_0}
  • θ\thetaangle between the field and the normal to the area
  • qencq_{\text{enc}}total charge inside the closed surface

Conductors in electrostatics

Field of a conductor

Einside=0,Esurface=σε0 (normal to the surface)E_{\text{inside}} = 0, \qquad E_{\text{surface}} = \frac{\sigma}{\varepsilon_0}\ \text{(normal to the surface)}
  • σ\sigmasurface charge density at that point of the surface

Common traps

Zero flux does not mean zero field

The net flux depends only on the enclosed charge, but the field on the surface comes from every charge, inside and outside. A surface with no charge inside can still have a strong field on it.

Measure the angle from the normal

In ϕ=EAcos⁡θ\phi = EA\cos\theta the angle is between the field and the normal to the area. A field lying along the surface gives zero flux.

A plane sheet's field does not fall with distance

For a large plane sheet E=σ2ε0E = \dfrac{\sigma}{2\varepsilon_0} at every distance. Only the line charge's field (as 1/r1/r) and the shell's field outside (as 1/r21/r^{2}) fall off.

Constant potential is not zero potential

Inside a charged conductor the field is zero, so the potential is the same everywhere. That common value is usually not zero.

Next to a conductor the field is σ/ε₀

Just outside a conductor E=σε0E = \dfrac{\sigma}{\varepsilon_0}, twice the σ2ε0\dfrac{\sigma}{2\varepsilon_0} of an isolated plane sheet. The field does depend on the surface charge density.

The surface field has no sideways part

At the surface of a conductor at rest the field is normal to the surface. A sideways part would push charges along the surface, and they would not be at rest.

Shielding works only for an empty cavity

The field is zero in a cavity with no charge in it. Put a charge inside the cavity and there is a field in the cavity, from that charge and the charge it draws onto the wall.

More NEET Physics formula sheets