PYQ Vault

NEET Physics · Formula sheet

Motion in a Straight Line formulas

9 formulas and 25 common traps for NEET Physics Motion in a Straight Line, grouped by subtopic.

Full notes with worked examples

Speed, Velocity and Relative Motion

Learn this subtopic in the notes

Average speed and average velocity

Average speed

vˉ=total distancetotal time,vav=2v1v2v1+v2 (equal distances)\bar{v} = \frac{\text{total distance}}{\text{total time}}, \qquad v_{av} = \frac{2v_1v_2}{v_1 + v_2}\ \text{(equal distances)}
  • v1,v2v_1, v_2speeds on the two equal stretches
  • vˉ\bar{v}average speed

Relative velocity in one dimension

Relative velocity

vBA=vB−vA,t=gaprelative speedv_{BA} = v_B - v_A, \qquad t = \frac{\text{gap}}{\text{relative speed}}
  • vBAv_{BA}velocity of B as seen from A

Common traps

Do not take the plain mean of two speeds

Over equal distances the average speed is 2v1v2v1+v2\dfrac{2v_1v_2}{v_1 + v_2}. Speeds of 40 km/h and 60 km/h over equal distances give 48 km/h, not 50 km/h.

A round trip has zero average velocity

A body that comes back to its start has zero displacement, so its average velocity is zero. Its average speed is the full distance over the full time, which is not zero.

Split the path where the body turns back

If the velocity changes sign inside the interval, the displacement is smaller than the distance. Find where v=0v = 0, then add the distances of the two legs.

Change km/h to m/s first

Multiply a speed in km/h by 518\dfrac{5}{18} to get m/s before you divide a distance in metres by it.

Bodies moving towards each other add speeds

Two bodies coming towards each other close the gap at the sum of their speeds. Subtracting gives a time that is far too long.

Count both lengths when trains cross

A train has fully passed another only when its back has cleared the other's front, so the distance covered is the sum of the two lengths, not one of them.

Calculus and Motion Graphs

Learn this subtopic in the notes

Velocity and acceleration from position

Derivatives of position

v=dxdt,a=dvdt=d2xdt2,v=u+∫0ta dtv = \frac{dx}{dt}, \qquad a = \frac{dv}{dt} = \frac{d^{2}x}{dt^{2}}, \qquad v = u + \int_{0}^{t} a\,dt
  • uuvelocity at t = 0
  • x0x_0position at t = 0

Acceleration when velocity is given against position

Acceleration from velocity against position

a=vdvdx=12d(v2)dx,v=1dt/dxa = v\frac{dv}{dx} = \frac{1}{2}\frac{d(v^{2})}{dx}, \qquad v = \frac{1}{dt/dx}

Slopes and areas of motion graphs

Slopes and areas

v=dxdt (slope),Δx=∫v dt (area),Δv=∫a dt (area)v = \frac{dx}{dt}\ \text{(slope)}, \qquad \Delta x = \int v\,dt\ \text{(area)}, \qquad \Delta v = \int a\,dt\ \text{(area)}

Common traps

Differentiate first, then put in time zero

Putting t=0t = 0 into the position equation gives the starting position, not the initial velocity. Differentiate first, then put t=0t = 0.

Zero velocity is not zero acceleration

Where a body turns back its velocity is zero, but its acceleration usually is not. Find the turning point from v=0v = 0 and the instant of steady velocity from a=0a = 0.

Add the starting value when you integrate

Integrating the acceleration gives the change in velocity. Add the initial velocity u (and the starting position for x), or the answer is right only for a body starting from rest at the origin.

The change of v with x is not the acceleration

dvdx\dfrac{dv}{dx} has the unit s−1\text{s}^{-1}, not m/s2\text{m/s}^{2}. Multiply it by v to get the acceleration.

Invert when time is given against position

When time is given in terms of position, differentiating gives dtdx\dfrac{dt}{dx}. The velocity is its reciprocal, v=1dt/dxv = \dfrac{1}{dt/dx}, not dtdx\dfrac{dt}{dx} itself.

Area gives displacement, not distance

Area under the velocity-time graph below the time axis is negative displacement. For the distance, take every area as positive and add.

Read the slope, not the height

A high point on a position-time graph means the body is far away, not that it is fast. Its velocity is the slope of the graph at that point.

A straight sloping velocity line is not uniform velocity

A straight sloping velocity-time line means uniform acceleration. Uniform velocity is a flat velocity-time line, or a straight sloping position-time line.

Uniform Acceleration and Free Fall

Learn this subtopic in the notes

Equations of uniformly accelerated motion

Equations of motion

v=u+at,s=ut+12at2,v2=u2+2asv = u + at, \qquad s = ut + \tfrac{1}{2}at^{2}, \qquad v^{2} = u^{2} + 2as
  • uuinitial velocity
  • vvfinal velocity
  • aaconstant acceleration
  • ssdisplacement in time t

Distance in the nth second

sn=u+a2(2n−1)s_{n} = u + \frac{a}{2}(2n - 1)
  • sns_{n}distance covered during the nth second only

Free fall from rest

Falling from rest

h=12gt2,v=gt,v=2ghh = \tfrac{1}{2}gt^{2}, \qquad v = gt, \qquad v = \sqrt{2gh}

Thrown straight up

Thrown up, up taken as positive

v=u−gt,s=ut−12gt2,H=u22gv = u - gt, \qquad s = ut - \tfrac{1}{2}gt^{2}, \qquad H = \frac{u^{2}}{2g}
  • HHgreatest height above the point of throw

Common traps

Only for constant acceleration

The equations of motion hold only when the acceleration does not change. If it changes with time, use v=dxdtv = \dfrac{dx}{dt} and integration instead.

Stopping distance goes as the speed squared

Doubling the speed makes the stopping distance four times, not two times, for the same braking.

Losing half the speed is not covering half the distance

A body slowing uniformly from u to u2\dfrac{u}{2} has already covered three quarters of its full stopping distance, because distance depends on u2−v2u^{2} - v^{2}.

In the nth second is not in n seconds

sns_{n} is the distance covered in one second only. The distance covered in the first n seconds is un+12an2un + \tfrac{1}{2}an^{2}.

The odd-number ratio needs a start from rest

The ratio 1 : 3 : 5 : 7 holds only when u=0u = 0. With a starting velocity, use sn=u+a2(2n−1)s_{n} = u + \dfrac{a}{2}(2n - 1) for each second.

Mass does not change g

With air resistance neglected, a heavier body does not fall faster. Every body has the same acceleration g.

Use the value of g the question gives

Work with g=10 m/s2g = 10\ \text{m/s}^{2} or 9.8 m/s29.8\ \text{m/s}^{2}, whichever the question states. Mixing them shifts the answer onto a wrong option.

Distance fallen grows as the time squared

Falling from rest for twice the time covers four times the distance, not twice. In h=12gt2h = \tfrac{1}{2}gt^{2} the time is squared.

Zero velocity at the top, not zero acceleration

At the highest point the ball stops for an instant, but gravity still acts, so its acceleration is g downwards.

Keep the sign of the displacement

When the ball lands below the point of throw, its displacement is negative. With s=ut−12gt2s = ut - \tfrac{1}{2}gt^{2} for the whole flight, a negative s gives the depth below the start; there is no need to split the flight at the top.

Velocity changes sign, speed does not

The velocity-time graph of the flight is one straight line through zero. A V-shaped graph is the speed, not the velocity.

More NEET Physics formula sheets