PYQ Vault

NEET Physics · Formula sheet

Ray Optics and Optical Instruments formulas

10 formulas and 24 common traps for NEET Physics Ray Optics and Optical Instruments, grouped by subtopic.

Full notes with worked examples

Reflection and Refraction

Learn this subtopic in the notes

Reflection and spherical mirrors

Mirror formula

1v+1u=1f,f=R2,m=−vu\frac{1}{v} + \frac{1}{u} = \frac{1}{f}, \qquad f = \frac{R}{2}, \qquad m = -\frac{v}{u}
  • uuobject distance from the pole
  • vvimage distance from the pole
  • RRradius of curvature

Refraction, Snell's law and apparent depth

Snell's law and apparent depth

n1sin⁡i=n2sin⁡r,n=cv,h′=hnn_1\sin i = n_2\sin r, \qquad n = \frac{c}{v}, \qquad h' = \frac{h}{n}
  • iiangle of incidence
  • rrangle of refraction
  • h′h'apparent depth seen from air

Critical angle and total internal reflection

Critical angle

sin⁡C=nrarerndenser=vdenservrarer,sin⁡C=1n (in air)\sin C = \frac{n_{\text{rarer}}}{n_{\text{denser}}} = \frac{v_{\text{denser}}}{v_{\text{rarer}}}, \qquad \sin C = \frac{1}{n}\ (\text{in air})

Common traps

A concave mirror has a negative focal length

With distances measured along the incoming light as positive, the focus of a concave mirror lies in front of it, so ff is negative. Putting f=+20f = +20 cm for a concave mirror puts the image on the wrong side.

Mirror magnification has a minus sign

For a mirror m=−vum = -\dfrac{v}{u}. Dropping the minus sign turns a real, inverted image into an erect one.

Frequency does not change

Crossing into a denser medium, light's speed and wavelength both fall by the factor n. Its frequency, and so its colour, stays the same.

Apparent depth depends on where you look from

From air, an object under water looks nearer. From inside the denser medium, an object in the rarer one looks farther: d′=d n2n1d' = d\,\dfrac{n_2}{n_1} with n2n_2 the observer's medium.

Only from denser to rarer

Light going from air into glass can never be totally reflected, however large the angle of incidence. Total internal reflection needs the light to start in the denser medium.

With speeds, the slower one goes on top

Since n=c/vn = c/v, sin⁡C=vdenservrarer\sin C = \dfrac{v_{\text{denser}}}{v_{\text{rarer}}}: the smaller speed is in the numerator. Writing the larger speed on top gives a sine above 1.

Lenses

Learn this subtopic in the notes

Thin lens formula and ray rules

Thin lens formula

1v−1u=1f,m=vu,n2v−n1u=n2−n1R\frac{1}{v} - \frac{1}{u} = \frac{1}{f}, \qquad m = \frac{v}{u}, \qquad \frac{n_2}{v} - \frac{n_1}{u} = \frac{n_2 - n_1}{R}
  • uuobject distance from the optical centre
  • vvimage distance from the optical centre
  • fffocal length, positive for a convex lens

Lens maker's formula and power

Lens maker's formula

1f=(n21−1)(1R1−1R2),P=1f (m)\frac{1}{f} = (n_{21} - 1)\left(\frac{1}{R_1} - \frac{1}{R_2}\right), \qquad P = \frac{1}{f\,(\text{m})}
  • n21n_{21}index of the lens relative to the surrounding medium
  • R1R_1radius of the first face met by the light
  • R2R_2radius of the second face

Combinations of lenses

Lenses in contact

1F=1f1+1f2+…,P=P1+P2+…,m=m1m2…\frac{1}{F} = \frac{1}{f_1} + \frac{1}{f_2} + \dots, \qquad P = P_1 + P_2 + \dots, \qquad m = m_1 m_2 \dots

Common traps

A concave lens has a negative focal length

Using f=+20f = +20 cm for a concave lens gives a real image where the lens actually forms a virtual one. Put the sign in before solving.

Lens and mirror formulas differ in sign

For a lens 1v−1u=1f\dfrac{1}{v} - \dfrac{1}{u} = \dfrac{1}{f} and m=vum = \dfrac{v}{u}. For a mirror 1v+1u=1f\dfrac{1}{v} + \dfrac{1}{u} = \dfrac{1}{f} and m=−vum = -\dfrac{v}{u}.

Light reflected back crosses the lens again

With a plane mirror behind a lens, the image made by the mirror becomes a new object for the lens, with the light now travelling the other way. The final image comes from this second pass.

Power needs the focal length in metres

P=1fP = \dfrac{1}{f} with f in metres. A lens of focal length 20 cm has power 10.2=5\dfrac{1}{0.2} = 5 D, not 0.05 D.

Keep the signs of the radii

For a biconvex lens R2R_2 is negative, so 1R1−1R2\dfrac{1}{R_1} - \dfrac{1}{R_2} becomes a sum. Dropping that sign makes an equiconvex lens look as if it had no power.

In a liquid, use the relative index

In water or oil, the lens maker's formula takes nlensnliquid\dfrac{n_{\text{lens}}}{n_{\text{liquid}}}, not the lens's own index. That is why a lens is weaker in water.

Add powers, not focal lengths

Lenses of 20 cm and 30 cm in contact give 1F=120+130\dfrac{1}{F} = \dfrac{1}{20} + \dfrac{1}{30}, so F = 12 cm, not 50 cm.

Lenses apart need the lens formula twice

The rule P=P1+P2P = P_1 + P_2 is only for thin lenses in contact. With a gap, trace the image through each lens in turn; an image beyond the second lens is a virtual object with positive u.

Magnifications multiply

The magnification of a lens combination is m1m2m_1 m_2, not m1+m2m_1 + m_2, even though the powers of lenses in contact add.

Prisms

Learn this subtopic in the notes

Deviation and minimum deviation

Prism

r1+r2=A,δ=i+e−A,n=sin⁡A+Dm2sin⁡A2r_1 + r_2 = A, \qquad \delta = i + e - A, \qquad n = \frac{\sin\frac{A + D_m}{2}}{\sin\frac{A}{2}}
  • AAangle of the prism
  • eeangle of emergence
  • DmD_mangle of minimum deviation

Grazing emergence and total reflection in a prism

Grazing emergence

r2=C,sin⁡C=1n,r1=A−C,sin⁡i=nsin⁡r1r_2 = C, \quad \sin C = \frac{1}{n}, \qquad r_1 = A - C, \qquad \sin i = n\sin r_1

Common traps

Deviation uses both faces

The deviation of a prism is δ=i+e−A\delta = i + e - A, not i−ri - r. At minimum deviation i=ei = e, so Dm=2i−AD_m = 2i - A.

The thin prism rule needs a small angle

δ=(n−1)A\delta = (n - 1)A holds only for a prism of small angle. For a 60° prism use the sine formula for minimum deviation.

Violet bends most, red least

Glass has a larger refractive index for violet than for red, so violet light is deviated more. Red, with the longest wavelength, is deviated least.

A normal ray does not bend at the first face

At normal incidence r1=0r_1 = 0, so the whole prism angle appears at the second face: r2=Ar_2 = A.

Grazing emergence means the critical angle inside

When the ray comes out along the face, the angle outside is 90°, but the angle inside the glass at that face is the critical angle C, not 90°.

Optical Instruments

Learn this subtopic in the notes

Simple and compound microscopes

Microscopes

msimple=1+Df,m=Lfo×Dfem_{\text{simple}} = 1 + \frac{D}{f}, \qquad m = \frac{L}{f_o} \times \frac{D}{f_e}
  • DDleast distance of distinct vision, 25 cm
  • LLtube length
  • fof_ofocal length of the objective
  • fef_efocal length of the eyepiece

Telescopes

Telescope

m=fofe,L=fo+fe,mnear point=fofe(1+feD)m = \frac{f_o}{f_e}, \qquad L = f_o + f_e, \qquad m_{\text{near point}} = \frac{f_o}{f_e}\left(1 + \frac{f_e}{D}\right)

Common traps

Near point or infinity changes the answer

A simple microscope gives 1+Df1 + \dfrac{D}{f} with the image at the near point but Df\dfrac{D}{f} with the image at infinity. Read which one the question asks.

The objective is the shorter lens in a microscope

In a compound microscope the objective has the shorter focal length; in a telescope the objective has the longer one. Swapping them puts the wrong focal length in the formula.

Telescope magnification is a ratio, not a sum

In normal adjustment m=fofem = \dfrac{f_o}{f_e}, while the tube length is fo+fef_o + f_e. Do not mix the two up.

The near-point setting magnifies a little more

With the final image at the near point, m=fofe(1+feD)m = \dfrac{f_o}{f_e}\left(1 + \dfrac{f_e}{D}\right), which is larger than fofe\dfrac{f_o}{f_e}.

More NEET Physics formula sheets