PYQ Vault

NEET Physics · Formula sheet

Work, Energy and Power formulas

9 formulas and 27 common traps for NEET Physics Work, Energy and Power, grouped by subtopic.

Full notes with worked examples

Work and the Work-Energy Theorem

Learn this subtopic in the notes

Work done by a constant and a variable force

Work

W=F⃗⋅d⃗=Fdcos⁡θ,W=∫x1x2F dxW = \vec{F}\cdot\vec{d} = Fd\cos\theta, \qquad W = \int_{x_1}^{x_2} F\,dx
  • θ\thetaangle between the force and the displacement
  • d⃗\vec{d}displacement, final position minus initial position

The work-energy theorem

Work-energy theorem

Wnet=Kf−Ki,K=12mv2W_{\text{net}} = K_f - K_i, \qquad K = \tfrac{1}{2}mv^{2}

Common traps

Only the part along the motion does work

A force with a part at right angles to the displacement does no work through that part. Use W=F⃗⋅d⃗W = \vec{F}\cdot\vec{d}, never the product of the two magnitudes.

Displacement is final minus initial position

When a body moves from r⃗1\vec{r}_1 to r⃗2\vec{r}_2, the work is F⃗⋅(r⃗2−r⃗1)\vec{F}\cdot(\vec{r}_2 - \vec{r}_1). Taking the dot product with r⃗2\vec{r}_2 alone gives a wrong answer.

Area below the axis is negative work

On an F-x graph, the parts where the force is negative subtract from the total. Adding every area as positive overstates the work.

Count the work of every force

The theorem uses the net work. Leaving out friction or gravity and using only the applied force gives too large a change in kinetic energy.

Kinetic energy goes as the square of the speed

Doubling the speed makes the kinetic energy four times, not two times. Halving the speed leaves one quarter.

Stopping distance grows with kinetic energy

For the same braking force, s=K/Fs = K/F. A car at twice the speed has four times the kinetic energy, so it needs four times the distance to stop.

Potential Energy and Conservation

Learn this subtopic in the notes

Potential energy of a spring

Spring potential energy

F=−kx,U=12kx2F = -kx, \qquad U = \tfrac{1}{2}kx^{2}
  • kkspring constant
  • xxstretch or compression from the natural length

Conservation of mechanical energy and the vertical circle

Mechanical energy

12mv12+mgh1=12mv22+mgh2,vtop=gl,vbottom=5gl\tfrac{1}{2}mv_1^{2} + mgh_1 = \tfrac{1}{2}mv_2^{2} + mgh_2, \qquad v_{\text{top}} = \sqrt{gl}, \quad v_{\text{bottom}} = \sqrt{5gl}

Common traps

Spring energy goes as the square of the stretch

Stretching a spring three times as far stores nine times the energy, not three times, because U=12kx2U = \tfrac{1}{2}kx^{2}.

Put the stretch in metres

With k in N/m, x must be in metres: 5 cm is 0.05 m. Using x = 5 makes the energy 10410^{4} times too large.

Compression stores energy too

A spring squeezed by x stores the same 12kx2\tfrac{1}{2}kx^{2} as one stretched by x. The sign of x does not matter once it is squared.

Tension does no work but still matters

The string's pull is at right angles to the bob's motion, so it does no work and drops out of the energy equation. It is still in the radial equation, and the string goes slack when it reaches zero.

Just going round needs √(5gl) at the bottom

A bob on a string needs gl\sqrt{gl} at the top. Rising 2l on the way up adds 4gl4gl to v2v^{2}, so the lowest point needs v2=5glv^{2} = 5gl, not 4gl4gl.

Measure every height from one level

When the string makes angle θ\theta above the horizontal, the bob is l(1+sin⁡θ)l(1 + \sin\theta) above the lowest point, not lsin⁡θl\sin\theta. Fix the lowest point as zero and keep it.

Gravity's work ignores the path

A body sliding down a smooth curved track reaches the same speed as one falling straight down the same height. Only the drop in height matters.

Power

Learn this subtopic in the notes

Power, efficiency and energy per second

Power

Pav=Wt,P=dmdt gh,η=PoutPinP_{\text{av}} = \frac{W}{t}, \qquad P = \frac{dm}{dt}\,gh, \qquad \eta = \frac{P_{\text{out}}}{P_{\text{in}}}
  • dmdt\dfrac{dm}{dt}mass moved each second
  • η\etaefficiency, useful output over input

Instantaneous power, P = F·v

Instantaneous power

P=F⃗⋅v⃗=Fvcos⁡θP = \vec{F}\cdot\vec{v} = Fv\cos\theta

Common traps

A kilowatt hour is energy

kWh measures energy (power times time), not power. 1 kWh = 3.6×1063.6 \times 10^{6} J.

Multiply by the efficiency for output, divide for input

Useful output = efficiency times input. To find the input from a known output, divide by the efficiency: an engine 60% efficient giving 2 kW takes in about 3.3 kW, not 1.2 kW.

Time changes the power, not the work

Lifting the same load to the same height takes the same work, mgh, however long it takes. A slower lift needs less power, not less work.

Steady speed does not mean zero motor force

At constant speed the net force is zero, but the motor still supplies a force equal to the weight plus the friction. The power is that force times the speed, not zero.

Find the velocity before the power

When the position is given as a function of time, differentiate it to get v, then use P=FvP = Fv. Multiplying the force by the position is a common slip.

Power is a dot product

Only the part of the force along the velocity delivers power: P=Fvcos⁡θP = Fv\cos\theta. Multiplying the magnitudes overstates it whenever the force is at an angle.

Collisions

Learn this subtopic in the notes

Momentum, kinetic energy and sticking collisions

Sticking collision

m1u1+m2u2=(m1+m2)v,K=p22mm_1u_1 + m_2u_2 = (m_1 + m_2)v, \qquad K = \frac{p^{2}}{2m}

Elastic collisions in one dimension

Elastic collision with the target at rest

v1=(m1−m2)u1m1+m2,v2=2m1u1m1+m2v_1 = \frac{(m_1 - m_2)u_1}{m_1 + m_2}, \qquad v_2 = \frac{2m_1u_1}{m_1 + m_2}

Bouncing and kinetic energy lost on impact

Rebound height

v=2gh,h2h1=KafterKbefore=(v2v1)2v = \sqrt{2gh}, \qquad \frac{h_2}{h_1} = \frac{K_{\text{after}}}{K_{\text{before}}} = \left(\frac{v_2}{v_1}\right)^{2}

Common traps

Momentum is kept even when kinetic energy is not

In a sticking collision kinetic energy is lost, but momentum is still conserved. Always find the speed after the collision from momentum, never from kinetic energy.

Equal momenta do not mean equal kinetic energies

With K=p2/2mK = p^{2}/2m, two bodies with the same momentum have kinetic energies in the inverse ratio of their masses: the lighter one has more.

Directions carry signs

When two bodies move towards each other, give one velocity a minus sign before adding momenta. Adding the speeds as if both moved the same way gives a wrong answer.

Velocities swap only in an elastic collision

Equal masses exchange velocities only when the collision is elastic. If they stick together, they share the momentum and move off at half the speed.

Watch the sign of the first body's velocity

When the striking body is lighter, (m1−m2)(m_1 - m_2) is negative and it bounces back. Reporting the size alone loses the direction.

Momentum for the impact, energy for the swing

A collision happens too fast for the string or gravity to matter, so use momentum (and kinetic energy if it is elastic) for the impact. Only after it does energy conservation give the height a bob rises.

Half the energy is not half the speed

A ball that loses 50% of its kinetic energy leaves at 12\tfrac{1}{\sqrt{2}}, about 0.71, of its striking speed, and rises to half the height.

Height follows energy, not speed

Rebound height is proportional to the kinetic energy kept, which goes as the square of the speed. Half the speed gives a quarter of the height, not half.

More NEET Physics formula sheets