PYQ Vault

NEET Physics · Formula sheet

Moving Charges and Magnetism formulas

10 formulas and 27 common traps for NEET Physics Moving Charges and Magnetism, grouped by subtopic.

Full notes with worked examples

Magnetic Force on Charges and Wires

Learn this subtopic in the notes

Magnetic force on a moving charge

Lorentz force

F⃗=q[E⃗+v⃗×B⃗],Fmag=qvBsin⁡θ,v=EB (no deflection)\vec{F} = q\left[\vec{E} + \vec{v} \times \vec{B}\right], \qquad F_{\text{mag}} = qvB\sin\theta, \qquad v = \frac{E}{B} \ \text{(no deflection)}
  • θ\thetaangle between the velocity and the field
  • E⃗\vec{E}electric field
  • B⃗\vec{B}magnetic field

Circular motion of a charge in a magnetic field

Radius and period

r=mvqB,T=2πmqB,μorbit=qvr2r = \frac{mv}{qB}, \qquad T = \frac{2\pi m}{qB}, \qquad \mu_{\text{orbit}} = \frac{qvr}{2}
  • rrradius of the circular path
  • TTtime for one revolution
  • μorbit\mu_{\text{orbit}}magnetic moment of the orbiting charge

Force on a current-carrying wire

Force on a wire

F⃗=I L⃗×B⃗,F=BILsin⁡θ\vec{F} = I\,\vec{L} \times \vec{B}, \qquad F = BIL\sin\theta
  • L⃗\vec{L}length of wire, pointing along the current
  • θ\thetaangle between the wire and the field

Common traps

A negative charge reverses the force

Find the direction of v⃗×B⃗\vec{v} \times \vec{B} first, then turn it round for an electron. Forgetting the sign of the charge gives the exact opposite direction.

A magnetic force does no work

The magnetic force is always at right angles to the velocity, so the kinetic energy of a charge in a pure magnetic field never changes. Only the direction of motion changes.

The angle is between v and B

In F=qvBsin⁡θF = qvB\sin\theta, θ\theta is the angle between the velocity and the field. A charge moving along the field has θ=0\theta = 0 and feels no force.

The period does not depend on speed

A faster charge makes a bigger circle but takes the same time to go round: T=2πmqBT = \dfrac{2\pi m}{qB} has no v in it.

Only the part of v across B makes the circle

When the velocity is at an angle to the field, use vsin⁡θv\sin\theta in r=mvqBr = \dfrac{mv}{qB}. The part along the field carries the charge forward, giving a helix.

The field along the wire does nothing

A wire lying along x feels no force from the x part of the field, since i^×i^=0\hat{i} \times \hat{i} = 0. Only the field components across the wire count.

Add the force components as vectors

When the cross product gives two perpendicular parts, the size is F12+F22\sqrt{F_1^{2} + F_2^{2}}, not F1+F2F_1 + F_2.

Biot-Savart Law and Circular Loops

Learn this subtopic in the notes

Biot-Savart's law

Biot-Savart law

dB⃗=μ04π I dl⃗×r⃗r3,dB=μ04π I dl sin⁡θr2d\vec{B} = \frac{\mu_0}{4\pi}\,\frac{I\,d\vec{l} \times \vec{r}}{r^{3}}, \qquad dB = \frac{\mu_0}{4\pi}\,\frac{I\,dl\,\sin\theta}{r^{2}}
  • I dl⃗I\,d\vec{l}a small current element
  • r⃗\vec{r}position of the point from the element
  • μ0\mu_0permeability of free space

Field of a circular coil, an arc and a straight wire

Circular coil and arc

Bcentre=μ0NI2R,Barc=μ0Iθ4πR,Baxis=μ0IR22(x2+R2)3/2B_{\text{centre}} = \frac{\mu_0 N I}{2R}, \qquad B_{\text{arc}} = \frac{\mu_0 I \theta}{4\pi R}, \qquad B_{\text{axis}} = \frac{\mu_0 I R^{2}}{2(x^{2} + R^{2})^{3/2}}
  • NNnumber of turns
  • θ\thetaangle the arc subtends at the centre, in radians
  • xxdistance along the axis from the centre

Common traps

No field along the element's own line

Biot-Savart's law has sin⁡θ\sin\theta in it, so a point lying on the line of a current element gets no field from that element at all.

The magnetic source is a vector

In Coulomb's law the source q is a scalar; in Biot-Savart's law the source I dl⃗I\,d\vec{l} is a vector. Swapping the two is a common wrong statement.

Do not forget the number of turns

A tightly wound coil of N turns gives N times the field of one turn: B=μ0NI2RB = \dfrac{\mu_0 N I}{2R}.

The arc formula needs radians

In B=μ0Iθ4πRB = \dfrac{\mu_0 I \theta}{4\pi R}, put a quarter circle as π2\dfrac{\pi}{2}, not 90.

A semi-infinite wire gives half

A straight wire running from a point to infinity gives μ0I4πd\dfrac{\mu_0 I}{4\pi d} beside its end, half the μ0I2πd\dfrac{\mu_0 I}{2\pi d} of a wire infinite both ways.

Two halves of a loop can oppose

When current enters a loop at one point and leaves at the opposite point, the two halves carry current round the centre in opposite senses. Their fields at the centre subtract, so with equal currents they cancel.

Ampere's Law, Solenoids and Parallel Wires

Learn this subtopic in the notes

Ampere's circuital law and the field of a straight wire

Ampere's law

∮B⃗⋅dl⃗=μ0Ienc,Bwire=μ0I2πr,Binside=μ0Ir2πa2\oint \vec{B} \cdot d\vec{l} = \mu_0 I_{\text{enc}}, \qquad B_{\text{wire}} = \frac{\mu_0 I}{2\pi r}, \qquad B_{\text{inside}} = \frac{\mu_0 I r}{2\pi a^{2}}
  • IencI_{\text{enc}}net current through the closed path
  • aaradius of the thick wire
  • rrdistance from the axis of the wire

Field inside a long solenoid

Solenoid

B=μ0nI,n=NLB = \mu_0 n I, \qquad n = \frac{N}{L}
  • nnturns per metre
  • NNtotal number of turns
  • LLlength of the solenoid

Force between parallel currents

Parallel currents

FL=μ0I1I22πd\frac{F}{L} = \frac{\mu_0 I_1 I_2}{2\pi d}
  • dddistance between the wires
  • I1,I2I_1, I_2currents in the two wires

Common traps

Inside a thick wire B grows with r

Inside a solid wire with evenly spread current the enclosed current grows as r2r^{2}, so B∝rB \propto r, not 1r\dfrac{1}{r}. The field is zero on the axis and largest at the surface.

Only enclosed current counts

In Ampere's law, currents outside the closed path add nothing to ∮B⃗⋅dl⃗\oint \vec{B} \cdot d\vec{l}, and opposite currents inside the path subtract.

Turns per millimetre must become turns per metre

In B=μ0nIB = \mu_0 n I, n is turns per metre. 100 turns per mm is 10510^{5} turns per metre; leaving it per mm makes the answer 1000 times too small.

The radius does not enter

The field inside a long solenoid is μ0nI\mu_0 n I whatever its radius. A radius given in the question is not needed.

Count every layer

A coil with 4 layers of 500 turns has 2000 turns in all. Use the total turns over the length for n.

Like currents attract

Parallel currents in the same direction pull together, the opposite of like charges, which push apart.

The force goes as the product

The force per metre is proportional to I1I2I_1 I_2, not I1+I2I_1 + I_2. Doubling one current doubles the force; doubling both makes it four times.

Both wires feel the same force

A wire with a larger current does not feel a larger force. Each wire feels μ0I1I22πd\dfrac{\mu_0 I_1 I_2}{2\pi d} per metre.

Magnetic Moment and the Galvanometer

Learn this subtopic in the notes

Magnetic moment of a current loop and the torque on it

Magnetic moment and torque

m=NIA,τ⃗=m⃗×B⃗,τ=mBsin⁡θm = NIA, \qquad \vec{\tau} = \vec{m} \times \vec{B}, \qquad \tau = mB\sin\theta
  • NNnumber of turns
  • AAarea of one turn
  • θ\thetaangle between the moment (the normal to the loop) and the field

Moving coil galvanometer, ammeter and voltmeter

Galvanometer conversions

ϕ=NABk I,S=IgGI−Ig,R=VIg−G\phi = \frac{NAB}{k}\,I, \qquad S = \frac{I_g G}{I - I_g}, \qquad R = \frac{V}{I_g} - G
  • IgI_gcurrent for full-scale deflection
  • GGresistance of the galvanometer coil
  • kktorsion constant of the spring

Common traps

Measure θ from the normal, not the plane

In τ=mBsin⁡θ\tau = mB\sin\theta, θ\theta is the angle between the field and the normal to the loop. A loop whose plane is parallel to the field has θ=90∘\theta = 90^{\circ} and the largest torque.

The same wire makes more turns of a smaller shape

Winding a fixed length of wire into a smaller shape gives more turns, so N changes along with A. Work out N=LpN = \dfrac{L}{p} before using m=NIAm = NIA.

Moment goes as the area

For the same current and turns, the moment of a circular coil goes as r2r^{2}. Radii in the ratio 1 : 3 give moments in the ratio 1 : 9.

The shunt carries I minus the galvanometer current

The shunt and the galvanometer share the same voltage: IgG=(I−Ig)SI_g G = (I - I_g)S. When IgI_g is tiny, I−Ig≈II - I_g \approx I.

Subtract G for a voltmeter

The series resistance is VIg−G\dfrac{V}{I_g} - G, not VIg\dfrac{V}{I_g}: the galvanometer's own resistance is part of the voltmeter.

More turns, same voltage sensitivity

Adding turns raises the current sensitivity, but the coil's resistance rises in the same ratio, so the voltage sensitivity does not change.

More NEET Physics formula sheets